How to glue foam ceiling plinth?

Enhancing the visual appeal of your room can be done easily and effectively by adding foam ceiling plinths, also known as moldings. These simple, lightweight pieces can completely change the appearance of any area by giving your ceiling a polished, elegant touch. The ability to correctly glue foam ceiling plinths is useful whether you’re building a new project or remodeling an existing one.

Ensure you have all the tools and materials you need before you begin. What you’ll need is a clean cloth, a miter box, a pencil, a measuring tape, adhesive made for foam, and a saw for cutting corners. Making sure you have everything you need on hand will facilitate a more efficient and seamless process.

To produce work that is professional, preparation is essential. To ensure a perfect fit, measure the walls and cut the plinth accordingly. For precise corner cutting, use the miter box. When the plinth pieces are prepared, clean the ceiling’s surface as well as the plinth’s back to make sure the adhesive adheres properly. For a solid hold, the surface must be dry and clear of dust.

Pay close attention to the adhesive’s application instructions provided by the manufacturer. Make sure you apply it evenly along the plinth’s back, leaving just enough to hold it firmly in place without causing it to ooze out. For the adhesive to set, firmly press the plinth against the ceiling and hold it there for a short while. Make sure the joints line up precisely for a seamless appearance by repeating this process for every section.

Lastly, stand back and acknowledge your accomplishments. In addition to adding style to your space, foam ceiling plinths give your remodeling or building project a polished appearance. By being meticulous and well-prepared, you can produce a polished outcome that improves the appearance of your area overall.

Step Description
1 Measure the length of the walls to determine how much plinth you need.
2 Cut the plinth to the correct length using a sharp utility knife or a fine-toothed saw.
3 Apply adhesive to the back of the plinth. Use a caulking gun for even application.
4 Press the plinth firmly against the wall and ceiling, holding it in place for a few seconds.
5 Use a damp cloth to clean off any excess adhesive.
6 Fill any gaps or seams with caulk and smooth them out with a wet finger or tool.
7 Allow the adhesive and caulk to dry completely before painting or finishing.

Advantages and disadvantages of polystyrene foam

Ceiling moldings made of gypsum, polyurethane, plastic, MDF, wood, polystyrene, etc. are available from the industry. But the most well-liked by customers are foam fillets. There are various causes:

For information, a class of white plastics with a foamed structure is referred to as foam plastic. In the production of fillets, extruded polystyrene and polymerized styrofoam granules, also called polystyrene foam, are used. The resultant materials need to be taken into consideration individually since they differ greatly from one another in terms of consumer and technological indicators. A lot of construction experts don’t know the difference between the pros and cons of different materials and how to attach them to the wall. We will discuss styrofoam baguettes in this work, i.e., the substance that gave polystyrene foam its name.

  • affordable price for all segments of the population;
  • durability – service life is determined by several tens of years;
  • simple installation, accessible to any beginner: just be careful and patient;
  • light weight, which allows you to easily glue the fillet onto wallpaper, including liquid wallpaper;
  • sufficient choice in surface shape and size, which allows you to use foam plinth in any interior design style;
  • beautiful appearance – they look strict and elegant, adding a certain chic to the decoration;
  • lack of response to changes in temperature and humidity – no linear expansion;
  • possibility of painting with acrylic water-based emulsion in a different color and installation under a suspended ceiling;
  • the material does not have any special maintenance requirements;
  • You can stick it to any wall surface: wallpaper, paint, whitewash, concrete, brick, drywall, etc.d.;
  • environmentally friendly – there are no harmful emissions into the air, therefore, there are no allergic reactions to the material;
  • polystyrene foam is not a breeding ground for mold and fungi – they do not reproduce even at high humidity and temperature. Therefore, it can be installed in the bathroom and kitchen.

Although there are shortcomings, they are essentially ignored. Among the drawbacks are:

  • The granularity of the material does not allow to beautifully design the joint: it does not work to cut perfectly smoothly – some grains do not cut, but fall out. Additional seam processing is required with sealant or putty;
  • the ability to melt in the dissolution of glue, and therefore it is necessary to apply a little glue to the tip of the panel and see the reaction of the material before the work;
  • fragility – it is easy to damage with slight deformation, in connection with which it is necessary to work very carefully;
  • Over time, they turn yellow, which can be eliminated by painting;
  • Dismantling only destroying (to save the planks of the skirting board only when removing with the wallpaper).

Foam mounting options for fastening

Experts differentiate between the type of fastening and the location when evaluating options for attaching a baguette made of foam.

They are distinguished by their fastening technique:

  • all types of adhesives using water as a solvent;
  • acrylic putty;
  • acrylic or silicone sealant;
  • liquid Nails.

Furthermore, mechanical fastening techniques are occasionally employed, such as teaner-driven brackets or, more colloquially, "construction staplers."

The location of the fastening may be:

  • wallpaper, including liquid;

Note: liquid wallpaper is removed under larger baguettes so that the mount is done directly on the wall (do not withstand weight). Under the foam, a similar operation cannot be carried out; it is simple.

  • paint, whitewash or putty. With this option, there is a great opportunity to level the curvature of the walls with pasto -shaped putty (to close the gap between the surface of the wall and the filler);
  • ceiling or wall and ceiling – used for poor adhesion of glue with the surface of the wall. For example, applied liquid trellises, which, with a hinged ceiling, need to be removed under the plane of the baguette.

In actuality, it is extremely uncommon to install a ceiling plinth on a wall without finishing because it makes painting or wallpapering the walls more difficult.

Attaching foam ceiling plinths to your walls is an easy and affordable way to give your rooms a more finished look. This tutorial will lead you through every step of the process, from selecting the appropriate adhesive to accurately cutting and assembling the plinths. You can improve the aesthetics of any space and achieve professional-looking results with a few basic tools and preparation. Whether you’re a novice or an avid do-it-yourselfer, these detailed instructions will make the project simple and enjoyable.

Materials and tools

Prior to beginning work, the following supplies must be bought:

  • foam baseboard;
  • glue (liquid nails or acrylic putty);
  • sandpaper P100 (P120).

Furthermore, you will require:

  • ladder;
  • a construction knife with a replaceable blade – only it gives an acceptable quality cut;
  • miter box;

  • roulette;
  • construction pencil;
  • narrow spatula;
  • ruler;
  • a rag or sponge to remove excess glue protruding from under the baguette.

Which glue to choose

A reasonable question to ask when getting ready for work is, "What glue should I use for foam ceiling plinths?" Ultimately, polystyrene foam has three drawbacks: it is extremely light, corrodes easily with solvents, and doesn’t stick to some adhesives. Instead, it just rolls off the baguette’s surface.

All of the following requirements are satisfied:

  • polyurethane foam;
  • polymer glue;
  • acrylic putty;
  • acrylic or silicone based sealant;
  • "liquid Nails".

The list that follows explains how to fasten a skirting board to a wall or ceiling. However, this does not imply that every adhesive type is economically and technologically sophisticated. For instance, it is useless to use sealants because of their high cost, and ceiling plinths can only be adhered to bare, unfinished walls using acrylic putty and polyurethane foam.

Glue

The best uses for glue are when the fillet and wallpaper need to be connected. However, keep in mind that the chemical reaction between the paint solvents and the polystyrene foam, which is used to make the baguette, limits the choice of adhesive composition. As a result, offering suggestions like "Titanium," "Eko-Hacet," or "Moment installation" is quite simple. The article "How to choose glue for baseboards" contains specific details about each type of glue. We will focus on a number of details:

  • use “Titan” (0.5 l costs 150 rubles. and above) and “Moment installation” (price 0.25 l starts from 200 rubles.) very expensive from the financial side. Here, in relation to polystyrene foam, the quality indicators of the glue are many times overestimated, which affects the price;
  • "Eko-Hacet" is affordable (from 65 rubles. for 0.25 l), but refers to contact types, which is not taken into account by most consumers. The glue has a completely different application technology: a “snake” layer is applied to the fillet, after which the plinth is pressed tightly against the wall and ceiling for a few seconds to leave a mirror trace of the adhesive. After which the baguette is set aside for the time indicated on the packaging (usually 5-10 minutes) for adhesion to appear.

Be aware that Moment glue may also be contact in certain circumstances. You should carefully read the instructions on the package or ask the seller questions about this feature.

Editorial advice: For budgetary and technological reasons, it is preferable to forgo using glue to attach foam baguettes.

Polyurethane foam

Polyurethane foam is the least expensive option for attaching a baguette. However, there are two prerequisites to use it:

  • wall without finishing;
  • plinth with free space on the back side (grooved or concave), where the foam can expand without tearing the fillet from the wall.

Acrylic putty

If the wall is not wallpapered, acrylic putty is a suitable glue substitute that won’t require much thought. The following factors make the choice the best one:

  • affordable;
  • easy to apply;
  • instant grip, sufficient for long-term fixation of the baguette without using your hands;
  • using putty, wall unevenness is repaired;
  • completely harmless to humans.

Prior to painting, penetrating solutions must be applied to the wall in two layers where the fillet is attached.

"Liquid Nails"

Different chemical components may be present in liquid nails. You will need to purchase adhesive for polystyrene foam that is based on synthetic resins on a water-acrylic basis. It sets quickly—between 15 and 30 minutes, with a 5-second write time from Tytan professionals.) possesses a high tear strength (40–60 kg/m2) for foam plastic and is suitable for use in a broad temperature range (–40 to +35 o C).

While it can be found at reasonable prices with careful searching, the relatively high cost is offset by convenient packaging and low consumption that can be used sparingly.

In conclusion, "liquid nails" work well in place of all other ceiling plinth attachment techniques. They provide dependable, long-term adhesion for fillets fixed to the base (wall or ceiling).

Criteria for choosing a plinth

When purchasing a plinth, make sure it will fit the house or apartment’s interior measurements. For instance, the width of the fillet affects both the visual perception of the room’s volume and the strength of the connection with the wall. Therefore, narrow baguettes appear better in small spaces than wide ones because they minimize volume. You can choose with ease from Table 1, where designers have provided the ideal proportions of fillets to room sizes.

Table 1.

Ceiling height, m ​​/ Room area 2.5 2.7 3
Up to 15 m2 3-5 cm Up to 9 cm Up to 10 cm
15-23 m2 5-7 cm 9-14 cm 10-15 cm
More than 23 m2 7-9 cm 14-18 cm 15-21 cm

With regard to the plinth’s design, it is pointless to offer specific advice because "there is no friend for taste and color." It is still worthwhile to cite professional advice, though.

  • If there are a large number of internal and external corners, it is best to purchase a fillet with a relief surface – the junction of the wall with the ceiling and the corners themselves look more harmonious.
  • When finishing a ceiling with two or more levels, preference should be given to a baguette with a smooth surface.
  • For classic trends in design, it is better to buy decor with a stucco surface, modern trends (high-tech, eco-decor, etc.d.) – smooth and narrow.
  • A narrow, smooth plinth looks good in any design, from simple to sophisticated.
  • The white color of the fillets together with the light ceiling visually expands the room.
  • For suspended ceilings, it is advisable to paint the baseboard to match the color of the canvas.
  • It is better to abandon the complex shape of the surface – difficulties arise with corner connections.

Sticker instructions

There are two sections to the instructions for attaching foam ceiling plinths:

  1. preparatory work;
  2. baguette installation technology.

Preparatory work

Prior to beginning to glue the ceiling plinth, you must carry out a few quick tasks:

  • move all furniture away from the walls, if this was not done at previous stages of finishing;
  • clean the area around the baguette from dust and dirt;
  • prime the plastered (painted) wall, as well as the ceiling;
  • determine the start and end location of work. This is especially important when the surface of the fillet is embossed. After all, the planks can be joined according to the pattern only in 3 corners. In the latter it is almost impossible to do this. Therefore, it is advisable to hide the last connection, for example, in a darkened area or behind curtains.

Important: To make adjusting the corner joints easier, experts recommend gluing the plinth in the corners first if the plank surface is smooth before finishing the wall. When creating the illusion of stucco or pattern, work begins at any angle and moves in the opposite direction.

Fillet installation technology

Starting from the corner that is most visible, glue the baseboard. The following is the step-by-step work algorithm:

  • the ends of the baguettes are cut for a beautiful connection in the corner, after which the convergence of the ceiling plinths is checked below in the same corner. If everything is fine, the next step is taken;
  • adhesive is applied to the reverse side. “Moment” and “Titan” – snake. “Liquid nails” – dotted, putty paste with a narrow spatula in a continuous mass on the back side of the baguette or on the wall and ceiling;
  • immediately after applying the glue, the fillet is pressed against the wall and ceiling. The main thing here is to prevent the decorative element from moving down or up;
  • the laid baguette is held by hand or with the help of tailor"s pins on the wall in a fixed position until the glue sets. The time is always indicated on the packaging. If it says: instantly, you shouldn’t believe it. In this case, it is better to ask the seller how long it is necessary to hold the parts to be glued, since no glue, except contact glue, is capable of immediately holding the parts to be glued;

Attention: we would like to remind you once more that contact glue takes time to become more adhesive.

  • remove any excess glue with a rag, carefully so as not to smear the wallpaper;
  • in the same sequence, fillets are attached around the perimeter of the room;
  • the gaps between the wall and the molding, as well as the joints, are sealed with sealant.

How to make corners

Getting the exact cut of the fillet end for the corner connections is the most challenging step in the entire technology of finishing a wall-ceiling junction. Since the angle in this instance is almost 90 degrees, there shouldn’t be any issues if the walls are plastered before finishing is applied. Cutting a 45-degree end at the baseboard is not tough in this situation. But in order to do this, a miter box—a unique tool—is required. The article "How to use a miter box for plinths" goes into great detail on how to use this tool.

If the angle is acute or obtuse, problems start. Here, a miter box is of no use. involves computations, pencil or marker markings, and tool-free cutting. The work "How to make a corner on a ceiling plinth" explains how to accomplish all of this as well as how to cut the baguette for the external and internal corners.

The nuances of installing foam plinth under a suspended ceiling

The repairs that are being made make sense when the ceiling molding is attached. It conceals the point where the boundaries of various finishing materials meet the wall at the ceiling. There are subtleties in installing fillets, though, because there are two types of ceilings: tension and rigidly fixed (plasterboard or concrete floors).

  • The rules for choosing a baguette are changing. So, for a stretch ceiling, the width of the lower part should be sufficient to be held with glue on the wall surface. After all, unlike a hard surface, glue can only be applied to the side plane.
  • The upper part of the ceiling plinth should not touch the fabric of the suspended structure. The optimal distance is 2-3 mm.
  • With a suspended ceiling, the shapes and sizes of fillets, etc. are visually perceived differently.d.

The resource "Plinth for a suspended ceiling" has more information about how to fix a baguette beneath a suspended ceiling.

Possible errors and ways to eliminate them

There were mistakes made in the work if the baseboard has sagged or fallen off. Let’s enumerate the most common ones.

  • Mounted on a dusty or dirty surface. Therefore, before starting work, grease stains and soot are removed from paint or putty. The surface is primed, as a result of which the dust is bound, and the adhesive properties of the walls increase. Wallpaper is cleaned of dust, and greasy stains are removed along with the wallpaper.
  • A mistake was made when choosing glue. It either contains solvents that corrode the baseboard, or is not intended for gluing foam to wallpaper or paint. The problem is solved by carefully studying the recommendations printed on the packaging.
  • No attention was paid to the contact nature of the glue, as a result of which it does not hold due to a violation of the gluing technology.
  • There are drafts in the room. Foam ceiling plinth, like wallpaper, categorically does not tolerate drafts: the glue dries quickly, as a result of which, firstly, it is difficult to adjust the position of the molding on the wall, and secondly, if the glue dries unevenly, there is a risk of deformation of the fillet. As a result, the baguette will be fixed on the wall (ceiling), but the quality of work in this case is not the best.
  • The time for fixing the fillet with hands or auxiliary materials for setting the adhesive mass was incorrectly selected.

Little tricks or expert advice

A review of several forums revealed that the most common queries from do-it-yourselfers are these ones:

  • Is it possible to paint a baguette;
  • how to make a corner;
  • how to glue foam skirting boards to the ceiling, etc.d.

The editors have compiled them and included expert recommendations.

  • It is possible and necessary to change the white color of the fillet to one of the colors in the palette. Acrylic water-based paint with added color is suitable for these purposes. It is advisable to paint before attaching the molding to the wall – the quality of painting is better. You can repaint the baseboard on the wall too. But then you need to be especially careful so that the colored spots do not end up on the wallpaper. After filling the joints with sealant, the joints are corrected with a small soft brush, which is usually used when working with watercolor paints.
  • The required amount of plinth is determined simply: one fillet is added to the perimeter of the room for unexpected losses.
  • The stretch ceiling is protected from glue by cling film.
  • Cutting the corners of the plinth for joining in the corners is best done in a device that builders call a wort.
  • If the walls in the room are decorated with two types of materials, for example, on one part of the surface there is a trellis, and on the other there is tile, then how to glue the fillet onto the tile in this case? You"ll have to buy "Titan" or "Moment Montage". Other adhesives do not hold well.
  • It is easier to adjust the corner plinth to size using the following scheme: cut an angle of 45 o at the right and left baguette; the quality of the joint in the corner is checked; if necessary, the ends are adjusted; the length of the corner fillet is determined (you can measure it with a tape measure or attach the baguette to the wall and mark the cutting line with a knife or pencil); in a miter box at an angle of 90 o, the plinth is cut to size using a knife.

Any room can be made to appear more finished and polished by applying foam ceiling plinths. At first, the process may seem overwhelming, but with the correct resources and guidelines, it becomes simple and doable. You can accomplish a professional-looking outcome by organizing your supplies, precisely measuring and cutting, and using the right adhesive.

To begin, collect the following items: a caulking gun, adhesive, a saw, a miter box, a measuring tape, and a foam ceiling plinth. Using the miter box for accuracy, precisely measure and cut the plinths to fit the corners of your ceiling. By doing this, the edges are guaranteed to meet precisely, producing smooth joints that improve the overall appearance.

Use a high-quality adhesive that is appropriate for foam when applying it. Evenly coat the rear of the plinth with it, then firmly press it up against the wall and ceiling, holding it there for a few minutes to make sure it adheres. Give the adhesive time to bond; if you rush this step, the installation will be less brittle.

The final details matter just as much. Fill in any holes or flaws with caulk, and for a smooth finish, smooth it out with your finger or a damp cloth. After the caulk dries, you can paint the plinths to match your walls and ceiling, or if they already go well with your decor, leave them unpainted. This last action completes the space and draws attention to the tasteful ceiling plinth addition.

A rewarding do-it-yourself project is glue foam ceiling plinths, provided you have the patience and attention to detail. It’s an affordable way to improve the appearance of your area, adding a chic and refined touch that uplifts the mood of your house as a whole. It doesn’t matter if you are remodeling or just want to update a space—this little addition can really help.

Video on the topic

How to glue ceiling plinth.

How to glue ceiling plinth

How to glue CEILING SKIRTING and BAGUETTE CORNICE. Look here

Installation of foam plastic ceiling plinth

How to glue a polystyrene ceiling plinth

How to properly glue a ceiling plinth/baguette

CEILING SKIRTING (FILLETS) EASY AND QUICK

How and how to glue the ceiling plinth. Baguette to the ceiling.

What factor is most important for you when choosing materials for building a house??
Share to friends
Timur Kiselev

Professional builder with 15 years of experience. I know everything about the construction of houses, cottages, bathhouses and other buildings. I will be happy to share my knowledge and experience with you.

Rate author
StroyArsenal62.com
Add a comment