How to make a stand for a soldering iron with your own hands

It’s important to maintain a safe and orderly workspace, especially when using tools like a soldering iron. If you’ve ever worked with a hot soldering iron that wasn’t properly supported, you are aware of the dangers and inconveniences involved. A decent stand keeps your workspace neat and helps prevent accidents in addition to giving your soldering iron a designated spot.

Constructing a DIY soldering iron stand is an excellent project that can be entertaining as well as useful. It doesn’t call for pricey supplies or highly skilled labor. You can easily make a stand that meets your needs with a few simple tools and materials. Having a personalized stand will enhance your workspace and provide you with peace of mind, regardless of your level of experience.

We’ll walk you through the process of building a straightforward and useful soldering iron stand in this tutorial. We’ll go over the supplies you’ll need, give clear directions, and offer advice on how to make sure your stand is sturdy and useful. At the conclusion, you’ll have a personalized stand that’s prepared to safeguard your soldering iron as you work.

Soldering iron stand – what is it for

The tool’s operation is made simpler by the stand’s presence. If required, the master need not worry about the hot tip scorching the table when placing the soldering iron on a handy structure.

It’s convenient to have a solder and rosin area on the base of a homemade product when building one.

Advice: Only fireproof materials should be used when building support posts.

Tools and materials

It’s important to get the supplies ready before beginning to assemble a soldering iron stand by hand. While working, the master will make use of:

  • a universal screwdriver with a set of heads or a screwdriver;
  • a hammer and pliers,
  • an electric drill and a set of drills for metal;
  • a ruler, a square, a marker;
  • an adjustable wrench;
  • a piece of timber;
  • self-tapping screws;
  • a stand resembling the shape of a plate or curved wire;
  • a clamping element from an electronic tool;
  • a small container for solder and rosin;
  • steel wire, the diameter of which is 2-3 mm.

It is essential to keep a soldering iron close by. To test the design’s level of convenience, the device will be required.

Manufacturing options

There are several ways you can make a soldering iron stand on your own. The best homemade options are listed below.

Wire stand

A tin can, bolts, washers, and single-core copper wires (60 cm) are required for the do-it-yourself artisan to rapidly create a design that can hold a soldering iron. For copper, a wire diameter of 4 mm is advised.

  1. First of all, remove the insulation from the wires.
  2. The wire is aligned and wound onto a pen/pencil to obtain a tight spiral.
  3. At the ends of the spiral, a fastening is made that resembles an eyelet in shape.
  4. A small hole is drilled at the bottom of the can.
  5. After this, you can insert the spring into the jar. The structure is fixed using bolts and nuts. Washers are used to ensure strong fastening.
  6. You can put cardboard under the finished homemade structure.

With wire and a jar, any do-it-yourself craftsman can create a stand.

Multifunction device

You can easily create a multipurpose stand with a solder pad, rosin, solder, and a handy soldering iron holder in a very short amount of time. The following supplies will be required by the master for the task:

  • board, the width of which reaches 1 cm;
  • old panel from the system unit (tin);
  • pair of glass bottle caps.
  1. First of all, cut out a sketch from wood and an old panel from a system unit according to a previously prepared drawing.
  2. The resulting parts are cleaned with sandpaper. The edges of the blanks are bent with pliers and a pair of holes are drilled on them.
  3. The blanks are painted.
  4. In a wooden stand, a couple of holes with a knife (under the lids) are made and wiped with a file.
  5. The wooden base is burned and covered with a layer of colorless varnish.
  6. The lids will need to be glued to epoxy resin, and screw tin parts with self -tapping screws.

You can easily solder tin, brass, copper products, polypropylene pipes, etc. thanks to the multifunctional design.

From improvised material

By using items you already have around the house, you can reduce the cost of manufacturing a stand. In order to create a practical design, you must first:

  • Fighting coarse;
  • hacksaw for metal;
  • Cross screwdriver (you can use a screwdriver);
  • thin screwdriver;
  • iron plate;
  • a spring that can be removed from the fountain pen;
  • a tin that closes the fee (can be removed from the broken receiver);
  • Metal latch from the antenna;
  • self-tapping screws 20 mm – 4 pcs.;
  • bolts – 4 pcs.;
  • Thin-sheet chipboard (up to 18 mm).

During the task, you will also require two rubber stoppers from chemical test tubes and pliers in addition to your own inventive methods.

For informational purposes only! You can find artisans on Yula or Avito who create unique and intriguing soldering iron stands. These goods have an almost artistic appearance.

  1. The cut chipboard sheet is sanded, giving it a rounded shape.
  2. Rubber plugs are cut straight. To achieve uniform thickness, you should use sandpaper.
  3. 1 self-tapping screw is screwed into each rubber leg.
  4. Holes are made in the structure and legs with screws are screwed in.
  5. The iron plate is bent, giving the outline of a hook.
  6. Using a screwdriver, holes are made for a pair of bolts intended for fixing the hook.

Tightening the bolts and assessing the hook’s hold will be the last steps in building a stand out of leftover materials.

Fuse stand

The craftsman will need to buy fuses and a wooden block in order to make a fuse holder at home. The latter will function as the foundation.

It is imperative that the bar’s surface is smooth. The soldering iron’s dimensions are exactly the same as the distance at which the fuse jaws are installed on the base. Self-tapping screws are used to secure the jaws of every fuse. Ready-to-use design that is convenient.

PCB holder

You’ll need to gather plenty of wooden corners and blocks to assemble the structure. The soldering iron’s dimensions are taken into consideration when choosing the product’s dimensions.

For instance, the first three bars can be up to 40 cm long, but the fourth and fifth shouldn’t be longer than 30 cm. The last four should measure eighteen centimeters in length. Using strong corners is ideal. Drilling eight holes is necessary for each one.

Additionally, it makes sense to buy M8 bolts ahead of time:

  • washers;
  • nuts;
  • wing nuts;
  • spring.
  1. You need to make 4 blanks from a fiberboard sheet, the size of which will be 70×20 mm.
  2. In 2 blanks, using a stationery knife, cut out recesses for wing nuts (2 recesses on each).
  3. A piece of chipboard with a wing nut is glued to another piece in which no holes have been drilled. Glue the remaining 2 parts in the same way. As a result, we manage to get a couple of blanks.
  4. After this, you will need to make notches and triangular recesses for gripping the board with a stationery knife. The notches are processed with a metal file and smoothed with a file.
  5. At the next stage, the racks are prepared. It is necessary to make a couple of through holes in the upper part and across. Each half is cut to half in order to reduce the resistance of the wood at the moment of fixing the holders.
  6. Having made oblique cuts, you need to drill holes for fasteners and make a countersunk hole for the caps.
  7. 2 long bar for the base is laid parallel to each other. The distance between them depends on the length of the soldering iron. The third bar is parallel to it and securely fixed.
  8. Ready -made racks are attached to corners.

You can mount a lamp or magnifier on the structure if you’d like.

Crucial! Make sure the paper is underneath the racks before proceeding freely along the rail.

Materials Needed Steps
Wood or metal base, a small metal holder, screws, and glue 1. Cut the base to your desired size. 2. Attach the metal holder to the base using screws and glue. 3. Let it dry completely. 4. Place your soldering iron in the holder.

Constructing a soldering iron stand at home is a satisfying project that blends functionality and artistry. A sturdy and useful stand that meets your unique requirements can be made with a few easy steps. This do-it-yourself project offers you a sense of customization and accomplishment in addition to financial savings.

Having a sturdy stand guarantees that your soldering iron is always accessible and securely stored when not in use, regardless of your level of experience. You can construct a reliable and effective stand with the correct supplies and a little work. It’s a simple project that will have a big impact on your workspace.

So, get your supplies and tools ready, and start building your soldering iron stand. It’s a simple task that can have a significant impact on your workspace. You’ll also feel accomplished knowing that you made it yourself!

Building a do-it-yourself soldering iron stand can be a useful and enjoyable project. With materials you most likely already own at home, this tutorial will demonstrate how to construct a reliable and useful stand. Having a sturdy stand will help keep your workstation safe and orderly, whether you’re a hobbyist or a professional. It will also guarantee that your soldering iron is always within reach and adequately supported. All it takes to create a stand that suits your needs and facilitates trouble-free soldering projects is a few easy steps and basic tools.

Video on the topic

Do -it -yourself soldering

TOP 10 Life hacks with a soldering iron + soldering homemade

How to make a simple stand for the soldering iron with your own hands

Make the stand under the soldering iron with the auto shutdown of the DIY Stand for Soldering Iron Autooff.

Cool homemade.Third hand+ with your own hands .

How to make a solder stand with your own hands

What factor is most important for you when choosing materials for building a house??
Share to friends
Timur Kiselev

Professional builder with 15 years of experience. I know everything about the construction of houses, cottages, bathhouses and other buildings. I will be happy to share my knowledge and experience with you.

Rate author
StroyArsenal62.com
Add a comment