Just about the difficult things: how to hang a cabinet on the wall yourself?

Are you considering painting a new cabinet on your wall? Although hanging a cabinet might seem difficult, you can confidently take on this do-it-yourself project if you have the right tools and follow the right steps. If you want to improve storage or make the most of available space in your house, knowing how to hang cabinets securely is a useful skill. You can finish the task quickly and safely if you adhere to these simple instructions.

It’s important to have all the required supplies and comprehend the procedure before getting started. Every stage counts toward a successful installation, from choosing the appropriate wall anchors to making sure everything is aligned correctly. This tutorial ensures that you can accomplish professional-looking results without requiring a lot of experience by breaking down the process into manageable steps.

You’ll be equipped with the knowledge and assurance necessary to mount a cabinet firmly to any wall surface by the end of this article. Gaining proficiency in this area will enable you to change your living environment, regardless of whether you’re an experienced do-it-yourselfer or taking on your first project. Together, we can hang your cabinet and create a stylish and useful addition to your house!

For your article "Just about the difficult things: how to hang a cabinet on the wall yourself?" here is a succinct and clear thesis statement. for the website "Everything about building and remodeling": Although learning how to hang a cabinet securely on your wall can seem difficult, it’s a doable do-it-yourself project if you have the right equipment and follow the right procedures. This tutorial simplifies the procedure into manageable steps, from selecting the appropriate wall anchors to guaranteeing a level installation. This post offers helpful advice and methods to confidently finish any task, regardless of experience level or the desire to add custom cabinetry to your house.

Tools, materials and fasteners

Equipment required:

• building level;
• roulette;
• a hammer drill (or electric drill) with a good set of drills for wood and concrete;
• screwdrivers: flat, Phillips (which one will be more convenient to work with, determine as you go along);
• screwdriver;
• a simple pencil or marker;
• hammer;
• fastening fittings: canopies, mounting rail, screws, dowels;
• clamps (to hold cabinets together).

How to properly hang the upper module yourself?

Height selection

We suggest that you consider the kitchen owner’s height. Measuring from the table top to the hanging box’s bottom bar, the approximate distance is between 450 and 600 mm (450 mm according to GOST). The middle shelf is at 900 mm, the third is at 1100 mm, and the bottom shelf is precisely at 450 mm. These measurements are thought to be adequate for working comfortably with food and the stove in the kitchen: extend your hand and you’ll see the bottom shelf.

Consider the size of the refrigerator or other household appliance first if the cabinet must be hung above it.

Types of wall mounts

Corner fastenings and mounting strip fastenings are the most common types.

To the corners

Corners are a basic component that resemble a tiny piece of metal that has been bent in half to resemble the letter "L" and has holes on both sides. Ideal for attaching and installing cabinets, but you’ll need assistance from a loved one because it can be challenging to perform all the tasks by yourself. It is simple to install metal corners on uneven walls and drywall. However, it is crucial to drill the hole because if you don’t, you won’t be able to change the position.

In the video, it is explained how to hang a cabinet on the corners:

On mounting rail/bar

A longitudinal metal strip serves as the mounting strip. It has holes drilled in it that range in length from 3 mm to 5 cm. Since there is no need to hang the structure to mark out where holes need to be drilled, this fastening method is easier than others. A cabinet is first hung on a rail that has been fastened to the wall and leveled using a building level.

The benefits of using these mounts

• Only one person can participate in the work, i.e. To. there is no need to support the box;
• furniture can be installed as accurately as possible, and then, if necessary, adjusted using the adjusting screw: move away or bring closer, raise higher or lower;
• set the length according to the notches applied to the tire for hanging the box;
• a leveling border is not needed;
• work can be done even if a kitchen apron is already installed.

Drawbacks:

• a set of mounting rail and attachment is not cheap;
• since the cabinet cannot be pressed tightly against the wall, a noticeable gap forms between it and the back wall (not only can this irritate the owner, but also small objects can get into this gap);
• walls must be smooth.

The following will be the protocol:

1. The back wall of the cabinet is removed.
2. Canopies are attached to the far corners (leave a tolerance of about 4–5 mm between them). If the structure is massive, the brackets are screwed with bolts with through studs. If the cabinet is small and light, self-tapping screws will be enough.
3. The upper limit is determined, a horizontal line is drawn along the length of all cabinets (using a level).
4. Holes for brackets are made on the back panel (see. point 2) drill or hammer. Window dimensions – 32×55 mm.
5. The removed back wall of the cabinet is put back in place and nailed. You cannot cut fiberboard with a knife – you need a hacksaw.
6. A horizontal line is drawn under the plank on the wall. The top of the mounting rail should be approximately 35 mm below the corresponding edge of the frame.
7. Since a standard strip is 200 millimeters long, in order to cut off a piece, you will need to use notches for breaking. The bar is placed on the table, then quietly moving back and forth, it breaks. The optimal step when drilling a brick or concrete wall is 30–40 cm, foam blocks or gas blocks is a maximum of 15 cm, when working with drywall – 10 cm. Take into account the markings on the slats.
8. Next, the plank is fixed with self-tapping screws into the dowel or anchors.
9. The box is hung in place: hooks are attached to the edges of the slats. All attached cabinets are connected to each other with furniture screws; a decorative cornice can be installed (to the upper base).

How to mount cabinets to a mounting rail is demonstrated in the video:

Preparing walls and fittings

The wall that will hold the cabinet needs to be ready, either by painting, wallpapering, or leveling. All hood and electrical installation socket work must be finished ahead of time. Installing a kitchen apron is also advised because it will be simpler in the future.

How to properly and evenly attach a hinged one: step-by-step instructions

On concrete and brick surfaces

Concrete walls are very strong; not every drill bit can penetrate them. Pobedite is more appropriate than any other material, but because it gets very hot when in use, it occasionally needs to be cooled with a cold liquid.

Recall that the tool must be in medium speed mode or shock-rotational mode when drilling. Avoid the obstacle ahead of time as the reinforcement will break off the tip if it gets under the drill.

Work schedule:

1. apply markings to the surface with a simple pencil;
2. make holes in the indicated places;
3. drive dowels into the holes, screw in self-tapping screws;
4. hang the cabinet on the bracket.

Brick walls are sturdy and suitable for supporting nearly any hanging furniture. Guidelines:

1. Place several points on the surface: you will screw screws into these places.
2. Use a level – it will help you carefully place marks at the required distance. You can use your eyes only if you already have experience. Otherwise, you will have to cement the old holes, wait until they harden, and then drill everything again.
3. After drilling and checking, take a hammer and a punch, make small holes for future holes. Usually brick walls are plastered, but if there is no confidence in the strength of the finishing layer, do not turn on the impact mode. Start with a smaller drill and gradually move to a larger one.
4. The finished hole should be the entire length of the anchor or dowel. Brush away any remaining dust and blow out any debris remaining inside.
5. Replace the dowel, screw in the screw with the hook. If fastening is done using anchors, tighten the nut with a wrench more tightly. It’s okay if one of the holes was drilled at the seam between the bricks: the fastening there will be as strong as on the brick itself.

Determine the seams’ locations beforehand. A typical brick measures 25 by 12 by 6 centimeters, with a seam of 1.5 centimeters.

How to hang a cabinet on a concrete wall is demonstrated in the video:

On drywall

For a load-bearing wall, a plasterboard box is typical, so steel studs are essential. They need to be at least 12 mm long, but no longer than 16 mm. The task is completed as follows:

1. make markings;
2. attach the mounting strip using studs (such a strip removes part of the load from a thin wall);
3. hang the locker.

The situation will become more complex if the partition is made of plaster alone. Using a magnet, you must first locate the metal frame inside before attaching the bar to it.

Cabinets should never be hung directly on plasterboard walls because the weight of the furniture will cause the wall to collapse and the cabinets to fall.

The characteristics of hanging a cabinet on drywall are explained in the video:

In the bathroom on tiles

This is not the place to "hammer in hand and go"—new repairs following such actions are assured. Additionally, you should refrain from using a soldering iron to try to remove the ceramic’s gloss or from using glass cutters or nails to create crosses on the tiles. Drilling at the tile joints poses a risk of breaking the tiles.

1. Prepare a drill, carbide drill with a hex shank or a diamond tip (for porcelain tiles). Coated tubular drills will quickly become unusable.
2. Place a mark on the tile with a marker, attach mounting tape (transparent so that the marker is visible).
3. Turn on the hammer mode on the drill, place it at a right angle. Slowly, at minimum speed, drive the drill into the mark. The mounting tape will prevent the drill from jumping on the tiles, it will soften the blows. Increase the speed gradually until you reach 200 per minute. Drill until you reach the end of the drill. Change it to a more suitable one if necessary, but the diameter of the drill must be the same, otherwise the tile will collapse. If the hole is very wide, use a drill attachment – a hole saw with a guide drill (there is a diamond surface).
4. Insert plastic dowels into the holes, screw in the screws, remove the masking tape. Hang the locker.

The following video demonstrates how to mount a cabinet to bathroom tiles:

You have the knowledge to approach this task with confidence now that you know how to hang a cabinet on the wall on your own. Recall that preparation is essential—drill once, measure twice! Before you start, make sure you have the necessary supplies and tools on hand. A safe and polished installation is guaranteed when you take your time.

You’ve gained the satisfaction of finishing a difficult task on your own by following the instructions, in addition to saving money on installation costs. The fundamentals are the same whether it’s a bathroom vanity or a kitchen cabinet. Your ability to complete do-it-yourself projects increases with each installation, which makes them even more manageable.

Never be afraid to go back and review these steps whenever you need a reminder. Hanging cabinets will come naturally with practice. Your house will be a testament to your skill, with cabinets hung on the walls with stability and elegance. Savor the procedure and the useful upgrades you make to your living area!

Video on the topic

How to quickly hang kitchen cabinets yourself

How to hang a kitchen cabinet. / Tips for selection and operation

Part 2. Secrets of an experienced collector. Installation of upper kitchen modules