Renovation basics: how to glue wallpaper in a new building?

Making a space fully your own is often the initial thrill of renovating a new building. Wallpaper hanging is one of the most frequent tasks in this process. It’s an easy method to give your walls personality and flair, completely changing the way a room looks and feels. If you want to update your decor or cover up plain drywall, knowing how to glue wallpaper correctly is crucial to getting a professional finish.

Prepare the following supplies before you start: wallpaper rolls, wallpaper adhesive, a utility knife, a smoothing brush or roller, a tape measure, and a wallpaper smoother or sponge. Making sure your walls are dust- and debris-free, clean, and dry is essential preparation. It is advised to apply a primer coat to freshly installed drywall in order to seal the surface and improve wallpaper adhesion.

To estimate the amount of wallpaper you’ll need, carefully measure your walls and account for any repeating patterns. By taking this step, you can make sure you buy the right amount and prevent running out of money when installing it. The majority of wallpapers include soaking times for adhesive or pre-pasted application techniques. To ensure that your wallpaper adheres securely and to achieve optimal adhesive activation, follow these guidelines.

When applying adhesive, begin at the top of the wall and work your way down in manageable sections. Apply the adhesive evenly using a paintbrush or roller. Refrain from oversaturating the wallpaper as this may lead to bubbles or distortions. After application, gently press the wallpaper up against the wall, smoothing any air bubbles and making sure the material fits the wall tightly.

Using a sharp utility knife, trim any extra wallpaper from the baseboard and ceiling after each strip is installed. Make sure that patterns blend together smoothly for a polished appearance. Prior to proceeding to the next, let every section completely dry, adhering to the drying duration specified by the manufacturer. After applying the right technique and paying close attention to detail, you’ll soon be able to enjoy your newly styled space with freshly wallpapered walls.

Is it possible to decorate the walls in a new apartment and is it worth doing??

Wallpaper is a popular choice among owners, which makes sense given its benefits. Finishing supplies are reasonably priced. Contemporary wallpaper manufacturers provide a vast array of textures and design options.

When comparing wallpaper to painting walls, the initial coating preparation will take significantly less time in the former scenario. Primers, plaster, and putty are all you need.

Although smooth walls are ideal, it’s acceptable if there are small imperfections. Thick wallpaper can conceal even the most severe flaws. Paint will only apply evenly on a perfectly smooth surface.

For people without repair experience, the wallpaper option is appropriate. The process of gluing them is not difficult. You can apply a range of design solutions because there is a large selection of finishing coatings.

Which coating to choose?

It’s crucial to take the wallpaper’s thickness into account first. Thin wallpaper will highlight all of the flaws in poorly plastered walls, so avoid using it there. Straight, long-striped wallpaper should not be adhered to an inadequately level surface. You can use wallpaper with a large pattern to cover up such a flaw.

Today’s wallpaper comes in a variety of forms:

• paper;
• vinyl;
• non-woven;
• leather;
• bamboo.

Every choice has benefits and drawbacks of its own:

1. Paper wallpaper is an inexpensive option, but it is easy to damage, which complicates the gluing process.
2. Leather wallpaper – an element of luxury. They look attractive, but not everyone can afford them.
3. Non-woven wallpaper is considered the best option for an apartment in a new building. Gluing them is quite simple, since they allow you to hide unevenness and do not deform when the new house shrinks.

When remodeling a new construction, applying wallpaper correctly can change the appearance and atmosphere of a room. This post walks you through all the necessary steps to achieve a perfect finish, including priming the walls, selecting the appropriate adhesive, precisely measuring and cutting the wallpaper, and smoothly applying it. Whether you’re a novice do-it-yourselfer or an experienced DIYer, knowing these fundamentals will guarantee that your walls are graced with artfully hung wallpaper that elevates the visual appeal of your house.

Preparing the walls

When residents move into a new building, they anticipate perfectly smooth walls. In actuality, things frequently don’t work out as planned, and you have to deal with uneven and dusty concrete walls. It is imperative to begin with rough finishing.

The following actions are part of it:

1. Spraying with plaster is carried out. The layer should have a thickness of 3-9 mm. The consistency should be such that all cracks and irregularities are filled easily. You need to start preparing for plastering by wetting the surface with water.
2. Next, a primer is applied in several layers.
3. Finishing with plaster. Layer thickness is 0.2-0.4 mm.
4. The walls are smoothed with sandpaper.

Use of a plaster mesh can remove uneven walls. On a smooth concrete wall, notches are made with a hammer drill to maximize the adhesion of the plaster and surface.

Following the first phase:

1. Surface primer. It provides fastening of the surface layer of the wall, as it penetrates deeply into concrete or plaster. It also helps remove dust and clean the surface. Preparing concrete involves priming at every step. To apply the primer composition, you can use a roller or brush. With rapid absorption, additional layers are applied. When the primer is dry, rough leveling is done.
2. After the primer has dried, putty is applied to eliminate cracks, irregularities and other defects. It is important to ensure that the surface is as smooth as possible. Before applying putty, you need to make sure that there are no fastening elements or fittings on the wall, otherwise rust will appear through the wallpaper in the future. The spatula must be used first vertically, then horizontally. To obtain a high-quality, uniform coating, it is recommended to use a wide spatula (30-40 cm), holding it at an angle of 25-30 degrees in relation to the wall. The corners are puttied with a corner spatula.
3. Finishing preparation involves sanding the surface with sandpaper or a metal mesh. This allows you to eliminate minor irregularities. Next comes the finishing primer.

As a result, the wall is ready to be covered with non-woven vinyl wallpaper and paper. In the case of liquid wallpaper, the surface needs to be flawlessly smooth. It is important to use specific products and multiple layers of primer because such wallpaper has the potential to remove stains and streaks from the concrete surface.

Gypsum is utilized in concrete wall construction. It lets you to securely glue liquid wallpaper while safeguarding its adhesive composition. To ensure that the liquid wallpaper adheres to the wall, a strengthening primer must be applied at the end. A spatula is required for applying liquid wallpaper.

How to carry out work?

In a new building, the wallpapering procedure is standard. You must get ready the following supplies and equipment in order to do this:

• ladder;
• bucket;
• tray;
• wallpaper scissors, cutter knife;
• narrow metal spatula;
• wide spatula;
• plastic spatula or wide rubber roller;
• small rubber roller;
• brush or roller for glue;
• pencil;
• roulette;
• plumb line or level.

It is advised to use a work table to apply the glue. In the event that it is unavailable, this can be completed on the previously covered floor with film.

1. Before starting work, you need to close the windows and doors. A draft will cause the glue to dry for a very long time. Due to this, peeling of the canvas is possible. It is important to turn off the power.
2. Before pasting the wallpaper, you need to cut it into strips and mark the top on the back. It’s better to put a mark on the edge that will be cut off in the future – this way the pasting will go faster. If the wallpaper is plain, the length of the strips is determined taking into account the height of the ceiling with an overlap of 5 centimeters at the bottom and top. If there is a pattern, the length of each strip must be increased by one step so that the pattern fits together correctly (we talked in detail about how to beautifully and discreetly glue wallpaper without forming noticeable seams, here).
3. You need to start work by marking the wall. A level is used to ensure straight lines. It is important to ensure that the glue does not get on the outside of the wallpaper, otherwise the stains will be noticeable. To prevent glue from appearing at the joints, do not apply it in too much quantity (how and how to apply glue to wallpaper?). If in the future the joints lag slightly behind the wall, they can be eliminated by applying glue pointwise to the required areas.
4. The corners are glued last. There are the following ways to properly paste them:
5. One of the pasted sheets needs to be turned at an angle so that on the adjacent wall the thickness of the strip is about a centimeter. The other canvas is cut so that the edge clearly falls on the corner. Joints are processed using a narrow roller. The disadvantage of this method is that overlaps can be noticeable (how to properly join wallpaper?)
6. Another method allows you to ensure a neat appearance of the corners even when using thick wallpaper. It involves gluing both canvases with an overlap of approximately 2 centimeters onto the adjacent wall. Then the excess strips are removed sharply. To do this, you need to rest against the corner with a wide spatula and smoothly move until the overlap is completely cut off.

The covering of external corners is essentially the same. Corner protrusions are pasted by wrapping one strip 1-2 centimeters around the corner and adhering the second strip clearly along the corner. The pasted corner will look nice in this instance.

Wallpaper selection and application are two of the most exciting aspects of renovating a new building. Starting with a smooth and clean surface is crucial. To guarantee that the wallpaper sticks correctly and to stop it from peeling in the future, prime the walls first. With caution, measure and cut the wallpaper, allowing a small amount extra for adjustments. Using a roller or brush, evenly apply the wallpaper adhesive, making sure it covers the entire surface.

Consider starting in a corner and working your way across the wall when hanging the wallpaper. Using a clean cloth or wallpaper smoother, gently push any air bubbles toward the edges to smooth them out. For a clean look, trim off any extra wallpaper from the baseboards and ceiling. To get the best outcome, be patient and take your time.

As directed by the manufacturer, let the wallpaper dry completely after hanging it. In order to guarantee that the adhesive sets correctly and the wallpaper sticks to the wall firmly, this drying time is essential. Examine the walls for any flaws or places that might require touch-ups after they have dried. To keep your renovation project’s overall quality intact, take quick action to resolve any issues.

Last but not least, for a neat finish, cleanup is necessary after wallpapering. Using a sponge and warm water, remove any remaining adhesive, being cautious not to rip the wallpaper. To extend the life of your tools, give them a thorough cleaning. Store any leftover wallpaper for future repairs. By following these instructions, you can appreciate the visual impact that tastefully chosen wallpaper has on your recently remodeled area.

Video on the topic

High-quality wallpapering with your own hands. Glue selection, marking, trimming.

█ How to glue wallpaper on the ceiling, all the nuances (renovation in an apartment).

We glue vinyl wallpaper on a paper basis for apartment renovations

Wallpapering concrete without puttying walls

IS IT POSSIBLE TO GLUE WALLPAPER WITHOUT PUTTY • WALLPAPER

How to hang wallpaper correctly with your own hands.

How to prepare walls for wallpapering