Rules for choosing linoleum in the corridor and installation secrets

Because of its strength, ease of upkeep, and range of design possibilities, linoleum is a popular option for flooring in corridors. For this high-traffic area of your house, choosing the appropriate linoleum can improve both the look and feel of the interior. But knowing where to begin can be difficult given the abundance of options.

Take into account aspects like thickness, wear layer, and backing material when selecting linoleum for your corridor. The durability of the linoleum against normal wear and tear is determined by these factors. Consider which color and pattern will work best with your decor and the overall design of your house.

An additional important factor to think about is installation. When installed correctly, linoleum lasts longer and looks fantastic. The subfloor must be ready, the linoleum must be precisely measured and cut, and the appropriate adhesive must be used. Even if you are handling the project alone, knowing these tips will help you finish it professionally.

This post will walk you through the key considerations when selecting the ideal carpet for your hallway and offer professional advice on how to install it. By using the appropriate method, you can make your hallway a chic and useful area.

Rule Description
Measure the Area Accurately measure your corridor to determine how much linoleum you need. Consider extra for cutting and fitting.
Choose the Right Thickness Opt for thicker linoleum for better durability and comfort underfoot, especially in high-traffic areas.
Select a Suitable Pattern Pick a pattern and color that complements your corridor’s decor and can handle wear and tear.
Check the Underlayment Ensure the surface beneath the linoleum is smooth and clean. Use a proper underlayment if needed to prevent imperfections.
Follow Installation Instructions Adhere to manufacturer guidelines for cutting, fitting, and installing to avoid issues like warping or lifting.
Allow for Acclimation Let the linoleum acclimate to the room temperature before installation to prevent expansion or contraction.

Is it possible to lay it in the hallway??

If the linoleum meets all the necessary requirements and matches the class for the maximum allowable static or dynamic load, it can be installed in almost any economy class premises in the corridor and hallway.

Increased mechanical strength, usefulness, dependability, and durability are characteristics of the linoleum in the hallway. It also resists deterioration from continuous exposure to water, the finishing coating resists chemical deterioration, and the top layer exhibits increased frictional resistance.

When it"s not practical?

It may not always be feasible to install carpet in the hallway or corridor for a variety of reasons, including:

  1. If this material is not provided for in the working design.
  2. If the PVC coating does not meet the increased fire safety requirements for the premises.
  3. If the print on the linoleum does not match other interior decoration details of the corridor or hallway.
  4. If the operation of the premises involves increased shock pulse or dynamic loads that cannot be absorbed by soft PVC material.
  5. If PVC linoleum does not have sufficient anti-slip properties, which can lead to injury. This is especially true if there are small children in the house.
  6. If the hallway or corridor is too wet, which requires the installation of porcelain tiles.
  7. In case the linoleum does not meet the thermal and sound insulation requirements.
  8. If heated floors with elevated temperatures are installed in the corridor or hallway, which can cause melting or softening of the structure of the PVC material.
  9. If semi-commercial grade linoleum is too expensive, and the owner of the property cannot afford it.

It is advised to create a working design beforehand and assess whether linoleum is a suitable flooring option for the overall interior design and operational requirements before deciding whether to install it in the hallways and corridors of private residential buildings or apartments.

Coverage Requirements

In comparison to living spaces in an apartment or private home, higher demands are placed on the linoleum that is intended to be installed in the corridor or hallway. These demands are related to the intensive use of the floor covering in question in a given room:

  • Recommended load class – not lower than 23, 31 or 32.
  • Category linoleum – household or semi-commercial.
  • Type of floor covering by number of layers – heterogeneous.
  • Linoleum thickness – at least 2.0 mm.
  • The thickness of the protective layer is at least 0.5 – 0.6 mm.
  • Resistance to abrasion – up to 20 – 25 microns.
  • Fire resistance – no higher than KM3.
  • Flammability group – from G1 to G2.
  • Availability of a substrate – preferably with a porous PVC base.
  • Water resistance – at least 95% – 100%.
  • The minimum level of noise absorption of linoleum substrate is from 10 to 15 dB.
  • Thermal characteristics of heterogeneous linoleum substrate – from 15 to 25 W/m 2 o K.
  • The colors and patterns on the surface of the linoleum must fully comply with the design project of the room and be combined with other interior details – walls, ceilings, lighting fixtures, pieces of furniture.
  • Linoleum for hallways and corridors in residential apartments and private houses should have a toxicity group no higher than T2.

The laid linoleum, whose class does not match the suggested parameter, will soon wear out prematurely if the aforementioned conditions are not fulfilled. As a result, after two to three years of use, the rafters will need to be replaced, which will come at an unexpected cost to the property owner.

Base requirements

The corridor’s linoleum should be installed over a sturdy foundation, to which further requirements are added:

  1. The screed must be made of concrete or cement-sand mortar with a binder grade of at least M300.
  2. Recommended screed thickness – at least 50 mm.
  3. It is recommended to reinforce the subfloor screed with steel or composite mesh with a rod diameter of at least 3 mm and cell dimensions of no more than 100 x 100 mm.
  4. The base should be treated with penetrating waterproofing immediately after laying the binder, its hardening and reaching its design strength.
  5. The surface of the screed must be leveled and free from cracks, chips, cavities, and places with delaminations. If this requirement is not met, it is allowed to install a layer of self-leveling floor on top of the supporting structure.
  6. The base for linoleum should be level, without slopes, depressions and burrs. If a clean PVC floor covering is installed on top of an old screed, it is recommended to first inspect it, identify the main defects, repair them with non-shrinking mixtures, and then mill and level them to achieve a flat surface.
  7. The top level of the base for linoleum should be below the design level of the finished floor by the thickness of the PVC floor covering with backing.
  8. On top of the rigid base of the subfloor, you recommend laying a backing made of plywood, hardboard, gypsum board sheets, chipboard, fiberboard or other flat materials, according to the project.
  9. In the case of installing heated floors made of pipe or electrical energy carriers in the body of the screed, it is recommended to lay a substrate made of dense materials that do not cause increased resistance to heat transfer, to improve heating efficiency.
  10. The floor screed should be rigid, not crunch or crack due to the application of both static and dynamic loads.

The base under the linoleum may be partially or completely destroyed if the aforementioned requirements and recommendations are not followed. Additionally, there is a greater chance of subsidence, which will make it much more difficult for users to move around on the floor and may result in a violation of their comfort.

Which one is better to choose??

In order to select the appropriate carpet for an apartment or other respectable residential building’s hallway or corridor, it is advised to consider the following guidelines and suggestions from industry professionals:

  • First of all, all the technical characteristics of linoleum from the quality certificate attached to each product unit.
  • The retail outlet must have all the necessary state certificates of conformity for the linoleum in question.
  • Before purchasing linoleum for the hallway, you need to make sure that the roll with this finishing material is securely sealed and has the necessary manufacturer’s mark, which indicates the originality of the product and its high quality, which is confirmed by the manufacturer’s warranty.
  • The selected linoleum should not have layers of defects, contamination, as well as physical wear or mechanical damage that may occur during transportation of the batch.
  • When purchasing several rolls of linoleum, you need to identify the matching shades. The best solution would be to purchase material strictly from one batch to avoid over-coloring.
  • Before purchasing, you should also check the uniform distribution of the thickness of the linoleum across the entire width of the roll, as this indicates compliance with the technology when manufacturing the product at the factory.
  • Regardless of the presence of an environmental certificate, many collections and modifications of linoleum from various manufacturers emit unpleasant chemical odors, which can significantly affect the comfort during use of the floor covering after laying the material. To avoid this, you need to identify these odors in advance and, if they are identified, refuse such a dubious purchase.
  • It is also important to pay attention to the price of the product at the point of sale, and then compare it with the official price list on the manufacturer"s website. If the cost of linoleum is significantly higher than offered directly from the factory, it may be a blow about unclaimed warehouse stock or a counterfeit product of low quality.

Brand recognition is one of the primary selection criteria, along with the company’s founding year, its place in the Russian market, and the existence of the greatest number of favourable reviews from actual customers of the upset product on independent Internet forums, all of which point to the product’s excellent quality, dependability, and durability.

This type of linoleum, which is meant to be installed and used in residential building hallways, comes in a variety of options, making it difficult for every buyer or property owner to make an instant decision and then come to regret it.

To make the selection process easier, the TOP 7 most popular models of the products in the category are listed below, along with a brief description of each, a brand, a collection description, technical specs, and the average retail price.

Tarkett IDYLLE NOVA Tango 4

Increased strength and optimal wear resistance were found in linoleum. constructed with textured lamination, with a clear varnish print underneath that faithfully replicates oak floorboards. A heat- and sound-absorbing underlay is included with this flooring, increasing energy efficiency and offering total comfort and coziness when using the material. Increased frost resistance is another feature of this modification’s linoleum, which is crucial when putting it in a hallway where the temperature may be lower than in an apartment or private home’s main rooms.

Features:

  • Permissible load classes – 23, 32.
  • The total thickness of linoleum is 3.7 mm.
  • The thickness of the working layer of linoleum is 0.5 mm.
  • Density per unit area – 2500 g/m2 .
  • The width of the improvised board on the print is 200 mm.
  • Warranty provided by the manufacturer – up to 15 years.
  • Floor covering abrasion rate up to 25 microns.
  • Flammability group of PVC material – B2.
  • Fire safety class – KM2.

Cost: 940 to 980 rubles for a square meter.

Komitex Lin Versailles Ophelia

Light linoleum covered in vinyl that resembles Roman-style porcelain tiles. The improvised tiles are laid in rhombuses with their corners touching each other because of the way the print is made.

As a result, additional diamonds are created at the intersection points, and these diamonds are then printed with an image distinct from the main design. The end product is a perfect replica of porcelain stoneware flooring material, enhanced by a multi-layer paint coating that creates a textured film and guarantees linoleum’s frictional resistance. The "Comitex Lin" brand. assemblage: "Versailles"

Features:

  • Permissible operating load class – 22.
  • The total thickness of linoleum is 3.0 mm.
  • The thickness of the protective front layer of linoleum is 0.2 mm.
  • The specific gravity of PVC flooring per unit area is 2000 g/m2 .
  • Dimensions of stylized porcelain tiles – 250 x 250 mm.
  • Error of linear dimensions – up to 0.06%.
  • Friction resistance – up to 28 microns.
  • Product toxicity – T2.
  • Flammability class – B3.
  • Fire danger category – KM5.
  • Warranty – up to 15 years.

Cost: between 550 and 650 rubles per square meter.

Juteks Forum Forest

Aesthetically pleasing PVC floor covering for exterior use, ideal for residential hallways or corridors with modern or ultramodern décor. Permanent pigment compounds are used to print on the linoleum’s surface, meaning that they won’t fade in the sun or come off when cleaned with chemicals.

Linoleum is designed to resemble worn-out oak plank flooring that has darkened from constant, heavy use. The primary benefit of this brand modification is that there are no visible signs of dirt, which is particularly significant in the fall. Juteks is the brand. Gathering: Forum.

Features:

  • Classification of material according to maximum operating load – 32.
  • The thickness of all layers of heterogeneous linoleum is 4.8 mm.
  • The thickness of the finishing layer of PVC flooring is 0.5 mm.
  • Density of linoleum per square meter – 2900 g/m2 .
  • The width of the improvised wooden board is 220 mm.
  • Permissible error in linear dimensions of the material – up to 0.05%.
  • Frictional resistance – up to 30 microns.
  • Product toxicity class – T2.
  • Flammability index of the material – B3.
  • Fire danger index – KM2.
  • Guaranteed period of flawless operation – up to 25 years.

IVC WINTER OAK 891

Multi-layer laminated PVC flooring that faithfully mimics the appearance of real wood-hard rock. The flooring material is modeled after broad floorboards that are connected in a row with chain-tied seams and lack interslat rust. Gray coating color with tints that vary in tone by one or two.

This linoleum has a polymer foam backing, which offers the necessary barrier against heat transfer. The backing is made of non-toxic, slightly flammable polymers that don’t trigger allergies in susceptible individuals, and linoleum doesn’t release offensive odors when it’s laid. IVC is the brand. Winter collection.

Features:

  1. Load category of linoleum in the corridor – 23.
  2. Total material thickness – 3.0 mm.
  3. The thickness of the front layer of linoleum is 0.25 mm.
  4. The specific density of the floor covering per square meter is 2350 g/m2 .
  5. The width of the print, stylized as natural boards, is 250 mm.
  6. The maximum error in the linear overall dimensions of the floor covering is up to 0.06%.
  7. Classification of material by wear resistance – up to 25 microns.
  8. Linoleum toxicity index – T2.
  9. Flammability index of the material – B2.
  10. Fire danger indicator – KM4.
  11. Warranty from the manufacturer – up to 15 years.

Cost: 750–850 rubles for a square meter.

Ideal Textile Magnatex Cabral W33

Light linoleum with an aged appearance, designed to resemble a parquet board. The material has multiple layers of varnish and a laminated film applied to it, which perfectly mimics the texture of real wood.

Any type of room can benefit from the finishing touch of universal linoleum, which can be used for both traditional and contemporary finishes. Because the insulated substrate is made entirely of synthetic materials, bacteria cannot grow there and cause it to rot or develop foul odors. Brand: Perfect. Magnatex textile collection.

Features:

  • Load ratings – 33.
  • The total thickness of linoleum is 3.5 mm.
  • The thickness of the working layer of linoleum is 0.6 mm.
  • Density per unit area – 2400 g/m2 .
  • The width of the improvised board on the print is 160 mm.
  • Warranty provided by the manufacturer – up to 15 years.
  • Material toxicity indicator – T2.
  • Floor covering abrasion index up to 22 microns.
  • Flammability group of PVC material – B2.
  • Fire safety class – KM2.

Cost: 650–700 rubles for a square meter.

Comfort TU-S Borey 4

This harsh linoleum replicates the dark-stained beech planks of a yacht deck quite well. The print features wide lamellas that are sewn together perfectly.

The textured plane displays all of the wood’s veins and knots, which is why the coating easily passes for real piece parquet. In private residential buildings with light-colored walls, wallpaper, or plaster, and dark furniture in a classic or vintage style, linoleum is perfect for the floors. "Shchekinsky linoleum" is the brand. Gathering: "Solace".

Features:

  • Classification according to maximum permissible operating load – 23, 32.
  • The total thickness of linoleum is 3.0 mm.
  • The thickness of the protective front layer of linoleum is 0.15 mm.
  • The specific gravity of PVC flooring per unit area is 1600 g/m2 .
  • Dimensions of stylized beech boards on print – 250 mm.
  • Permissible error in linear dimensions of the material – up to 0.04%.
  • Resistance to friction causing premature wear of the material – up to 28 microns.
  • Numerical indicator of product toxicity – T2.
  • The standard flammability index of the material is B4.
  • Fire danger parameters – KM5.
  • Manufacturer-guaranteed period of flawless operation – up to 15 years.

Cost: 550–700 rubles for a square meter.

Forbo Superstep Decibel

Special premium material from a higher price range that perfectly mimics the look of flooring in the old Soviet style, known as panel parquet, which is composed of oak boards glued into a single plane. Every one of the makeshift boards is coated in textured lamination, which is then shielded by three layers of flexible, highly durable, and non-toxic varnish. The process of cold welding and tinting the laid PVC floor covering with a vinyl protective layer ensures the tightness of the linoleum and completely prevents the formation of seams. Higher wear resistance, dependability, and practicality define the flooring.

Superstep Collection; Brand: Forbo.

Features:

  • Category of polymer linoleum in the hallway and corridor according to load – 23, 32, 33.
  • The total thickness of all layers of material is 3.0 mm.
  • The thickness of the front layer of linoleum is 0.7 mm.
  • Guaranteed density of flooring per square meter is 2500 g/m2 .
  • Width of print, improvised panel boards – 300 mm.
  • The permissible error in the dimensional parameters of the floor covering is up to 0.03%.
  • Wear resistance – up to 18 microns.
  • Toxicity – not higher than T2.
  • Flammability – B2.
  • Fire danger – KM2.
  • Warranty period – up to 25 years.

Cost: between 3000 and 3300 rubles for a 1 m 2 area.

Because it was created exclusively using the opinions of actual customers, the rating above is subjective and not intended to be used for advertising purposes. In this sense, the TOP 7 is merely suggestions and shouldn’t be interpreted as an outright call to buy a particular item.

Installation instructions

It is advisable to leave the responsible task of laying laminate flooring to experts. All work will be finished by contractors in a timely manner with guaranteed outcomes. If the property owner is not afforded this opportunity, all production and installation tasks can be completed manually, provided that they adhere to the straightforward guidelines and flow charts provided below.

Leveling the floor

Leveling the subfloor in preparation for linoleum installation is the most crucial step. In order to attain the desired outcome, several crucial technological procedures must be carried out, specifically:

  1. If finishing work is carried out in a residential premises on the secondary market, it will be necessary to dismantle the old floor covering in full.
  2. The old screed is examined for physical wear, after which a defective statement is drawn up based on the inspection results and an expert opinion is issued, on the basis of which the structure either must be completely dismantled or must be repaired in places where various defects are identified.
  3. To repair chips, sinkholes, seal cracks or places with delamination, a non-shrinking cement-sand mixture must be purchased, and all work is carried out according to a separate technological map.
  4. When the repair work is completed, the polymerization and strength gain of the non-shrink mixture are waited.
  5. Similar restoration work may be required when installing linoleum on top of a new floor slab in a new building, since span structures often have defects that arose during construction and installation work on the construction of the building frame.
  6. After the repair mixture has reached its design strength, it will be necessary to mill and grind the surface of the concrete or cement-sand structure using special equipment – a milling cutter or a paddle smoother.
  7. If the old screed is completely dismantled, a new subfloor in the corridor will need to be poured using a semi-dry or wet method.
  8. When installing a screed indoors using the wet method, you will need to install beacons, lay a reinforcing steel or composite mesh, and install a damper tape around the perimeter of the room.
  9. In a separate container or in a mixer, mix cement-sand or concrete screed mixture in the required proportion.
  10. Concrete or cement-sand mortar is poured into the structure prepared for installation of the screed, placed on top of the floor slab.
  11. After pouring, liquid concrete is distributed and smoothed with a rule or vibrating screed between the beacons until a perfectly flat plane is achieved. If necessary, a new plastic cement-sand mortar is additionally added to the structure.
  12. When installing a cement-sand screed with structural fiber reinforcement using a semi-dry method, it is recommended to contact a specialized contractor. This is due to the fact that to perform work in this category, it is necessary to use an automated mixing device, as well as supply the finished material to the installation horizon through a concrete pump with a damper and then use a “helicopter” to finalize the structure.
  13. If necessary, if it is necessary to maintain a perfectly flat plane, for example, when laying soft and thin linoleum, it is recommended to install a small layer of self-leveling self-leveling floor with polymer additives in the corridor or hallway to be finished, which allows you to achieve the expected result.

After floor leveling is finished, you should thoroughly inspect the screed and the underlay underneath it to make sure they are both flawlessly level and free of flaws. Only then can you safely move on to linoleum installation.

Insulation

If the hallway floor is on a floor slab with a room beneath it that serves a different purpose and has a different temperature and humidity level, or if people are going to walk on the linoleum without shoes, it is advised to insulate the base using energy-efficient insulating materials. Here are some easy steps to follow in order to do this:

  1. A leveling screed is poured over the floor slab or other span structure, floors on the ground, foundation slabs.
  2. After waiting for the screed to harden, the structure is sanded, swept and dusted.
  3. In the case of installing polystyrene foam boards of the selected thickness, you only need to cut them after taking measurements and marking them using a marker and laying them “in the lock”, which is formed by the finished ends of the insulating materials.
  4. Expanded polystyrene boards of the Penoplex type are recommended to be cut with a construction knife with a retractable blade, strictly along a previously drawn marking line.
  5. After laying out the entire insulation plane of their extruded polystyrene foam, it is necessary to foam each joint using polyurethane foam to eliminate the occurrence of thermal inhomogeneity and prevent the movement of insulating materials during the pouring of the protective screed of the subfloor.
  6. In the case of installing insulation from hard mineral wool slabs, each unit of this material must be wrapped in a vapor barrier and waterproofing film to prevent their saturation with moisture both during installation and during operation.
  7. After laying out and finalizing the insulation, you will need to install a protective floor screed in rooms made of concrete or cement-sand mortar. Since this structure will be located above the elastic insulation, taken as the base, it will require mandatory reinforcement with mesh, as well as compliance with the minimum layer thickness – from 40 mm or more.
  8. On top of the insulation, plastic supports with a bruised base for fixing a constant protective layer of concrete to a reinforcing grid are exhibited. An increased heel of fixers is needed so that the elements are not pushed under the weight of the mesh in the body of the elastic insulation.
  9. After exposing reinforcement and lighthouses, in accordance with the above instructions, a concrete or cement-sand mortar is prepared, which is poured into the formwork prepared for it and is smoothed out by the rule, or a vibration between the beacons.
  10. When the screed has hardened and gained design strength, depending on the content of the working project, it may require the installation of a bulk floor, which is leveled by the plane under the influence of gravitational forces until a perfectly even base is reached by linoleum.

It is advised to first create a working drawing of the entire structure, precisely determine the elevation of the finishing and rough surfaces, and calculate the heat transfer resistance of the enclosing structures based on the necessary and actual temperature and humidity conditions in adjacent rooms, before insulating the floor in a corridor or hallway under linoleum.

Laying

For many homeowners of residential real estate, the act of installing carpet on a previously leveled and prepared foundation seems like a fairly easy task. Nonetheless, the quality and accuracy of this procedure’s execution determines some of the most crucial factors, including comfort when using the flooring in a frustrated room, the interior’s aesthetic appeal, and the material’s durability made of PVC.

Along with this, you should complete every step of the following algorithm and pay closer attention to a variety of subtle details when installing and fixing linoleum on the floor:

  1. The quality of the base under linoleum is checked over the entire area of ​​the corridor’s destroyed space or hallway.
  2. If defects are detected, local repair and alignment of the base is carried out. According to the technological map described in detail above for the corresponding stage of work.
  3. An underlying layer is placed on top of the base – moisture-resistant plywood, hardboard, or fiberboard, chipboard, plasterboard or other materials, if their use is allowed by the working design.
  4. The distance from wall to wall of the room being finished will be adjusted to the nearest millimeter. It is recommended to write down the obtained measurement results on a sketch of the room on a piece of paper in advance, so as not to subsequently confuse the cards with linoleum.
  5. Linoleum is marked with a permanent marker, according to previously made measurements and cut into separate cards. After cutting the roll into cards, it is recommended to lay them face down in an adjacent room to allow the linoleum to rest and straighten under the influence of gravitational forces. This will significantly facilitate the installation of the material and improve the quality of the result, eliminating the formation of installation defects.
  6. For each new linoleum map, it will be necessary to take individual measurements of the dimensions of the room being finished in order to avoid unnecessary trimming or shortage of flooring material.
  7. Each linoleum card is marked in accordance with the required sequence and individual row number when laying it.
  8. Before installation, the base under the linoleum is swept and dusted; if necessary, a thorough wet cleaning is carried out and the substrate is dried on top of the screed.
  9. The base is treated with an adhesive composition using brushes with stiff synthetic bristles, after which it is evenly distributed over the surface of the subfloor with a roller.
  10. All linoleum cards are laid out sequentially throughout the room, creating a minimum gap at the joints. As it is laid out, the linoleum is pressed across the entire width of the card to the base so that the reaction of the material with the adhesive composition begins
  11. When the linoleum is laid, it is necessary to remove any remaining glue that has protruded beyond its limits, and then smooth the surface with a roller until all folds and air bubbles are removed.
  12. At the final stage, cold welding of linoleum joints is carried out – filling the gaps with special elastic sealants to ensure complete sealing of the structure.

It is necessary to wait for the floor covering’s polymerization period of two to three days after laying and fixing the linoleum in order to prevent movement when applying full operational loads and to guarantee the material’s flawless operation throughout the entire warranty period without the need for significant repairs or replacement of the PVC in question products.

Extra details in the video:

Possible mistakes

Beginners often make a lot of terrible mistakes when laying linoleum in the hallway and corridor, which almost always have unfavorable outcomes.

To avoid this, you should closely follow the advice and specifications provided by experts and professionals when carrying out these installation procedures, in particular:

  • Purchasing linoleum for a corridor or hallway with technical characteristics that do not meet the operational requirements for a particular room – the durability of the floor covering is reduced due to rapid physical wear and mechanical damage to the protective finishing layer of the material.
  • Purchasing linoleum for the premises in question without a backing will require the installation of an additional layer of insulation of the subfloor screed, which will entail unforeseen costs, a reduction in the height of the premises due to an increase in the thickness of the floor pie and significant labor costs, and the installation time of the flooring material will also be significantly extended, due to for the need to wait for hardening and installation, apply a quiescent layer of cement-sand screed on insulating materials.
  • Purchasing PVC material from a dubious manufacturer that does not have certificates of environmental safety and satisfaction of sanitary and hygienic requirements increases the risk of the release of toxins in the room after laying linoleum, which can lead to allergies or irritation of the respiratory tract in dependent people.
  • Neglecting to create a reliable base and then level it before laying linoleum in the corridor or hallway. In such cases, there may be a risk of destruction of the screed, subsidence or rupture of the linoleum, as well as a crunching sound when walking on the floor covering, which will increase every month, causing discomfort.
  • Neglecting to measure the room from wall to wall before laying each new linoleum card after cutting. The walls in a room are not always perfectly smooth, which leads to the need for unnecessary trimming, as well as an insufficient amount of PVC flooring material directly during its installation.
  • The absence of a substrate made of fiberboard, chipboard, plywood, hardboard or other materials under linoleum, which often leads to a decrease in thermal performance and loss of sound insulation properties.
  • Neglecting the requirement of fixing linoleum with adhesives – during operation of the material, its displacement may occur, which can lead to the formation of folds and bubbles, loss of aesthetic appearance, as well as peeling of the linoleum sandwiched under the baseboard.
  • Neglecting the rule of preliminary cutting of linoleum after marking and marking it, which often causes increased labor costs when laying the material and cutting it in place.

Before laying linoleum by hand, watch multiple full-length video lessons and master classes from professionals who frequently share their experience with other users on the network. This will help you avoid mistakes and achieve the desired outcome from the start.

Advantages and disadvantages

When compared to many other finishing materials, linoleum has many unquestionable advantages that make it a popular choice for finished floor coverings in hallways and corridors among residential real estate owners, regardless of age or social status. These advantages include:

  • High strength flooring material with class from 22, 23 – 31, 32 and higher.
  • The ability to choose almost any texture, pattern and color, given the wide selection of materials on sale.
  • A high-quality and reliable replacement for porcelain tiles on the floor, but linoleum is a much cheaper solution.
  • Possibility of installing high-quality PVC or vinyl linoleum on top of pipe or electric heated floors.
  • Ease of wet or dry cleaning in corridors and hallways without restrictions.
  • Complete waterproofness of the linoleum material for the corridor, subject to the processing of the joining seams using the cold welding method to ensure complete sealing of the floor covering.
  • Low dead weight of linoleum compared to porcelain tiles, which does not contribute to excess static loads on floors with weak thin span structures in the building, for example, on wooden beams or corrugated sheets.
  • The ease of cutting and laying linoleum, unlike porcelain tiles, this installation process does not require any wet processes and a long wait for complete polymerization and development of the design strength of the adhesive substance.
  • The substrate under linoleum provides excellent thermal and sound insulation properties.
  • Linoleum has a small thickness and does not eat up the useful height in the room, which is especially important for Khrushchev-era apartment buildings with low ceilings.
  • Modern linoleum does not burn, is a self-extinguishing material, and is made only from environmentally friendly materials with a low level of toxicity. This is due to the fact that over the past 2 decades, polymer products that are used as finishing materials have been subject to the highest requirements from regulatory government bodies to ensure safe operation. Thus, every company officially registered on the market is obliged to send prototypes from all batches of goods coming off the assembly line for laboratory tests to obtain a certificate of full compliance with sanitary and environmental requirements.
  • The optimal combination of the low retail price of this product, practicality, reliability, ease of operation, as well as durability – most manufacturers provide a guarantee for all their products from 15 to 30 years.
  • Many models of linoleum in the corridor are easily exposed with slight physical wear on the front surface.
  • Linoleum in the corridor is characterized by increased frictional resistance and does not collapse even after the application of significant dynamic and shock impulse loads.
  • This finishing material does not fade in the sun, which is why permanent paint prints do not lose their aesthetic qualities and functional properties.

However, despite the benefits mentioned above, linoleum installed in a corridor also has a number of drawbacks that often result in customers choosing to install other kinds of flooring in hallways and corridors:

  • New linoleum, after being laid in a corridor or hallway, can emit unpleasant odors for 1 – 2 months, which are almost impossible to remove or ventilate even with a constantly open window in a room with a strong draft.
  • Linoleum is sold only in rolls, which are intended for installation in rooms with an area of ​​at least 20 – 25 m2, which is not always required in small apartments or private residential buildings.
  • In case of accidental damage, linoleum is difficult to repair and restore without traces.
  • If water gets under the substrate, the material may begin to mold, which will be accompanied by the development of fungus and the appearance of characteristic putrefactive odors in the corners.
  • When cutting linoleum, a large amount of waste is often generated that cannot be used later.
  • Linoleum does not tolerate increases in the temperature of heated floors to more than 40 – 45 o C.
  • Due to the porous energy-efficient structure, linoleum can begin to press under significant static loads, which often requires the installation of spacers from scraps of the same material under the narrow legs of pieces of furniture.
  • Careful leveling of the base is required until a perfectly flat plane is achieved, since, in the presence of defects, all the unevenness of the rough floor screed is often projected onto the linoleum.

The only wise course of action when it comes to installing linoleum in the residential space you are considering is to get in touch with an interior designer ahead of time, collaborate with him on a 3D model of the future hallway or corridor, choose the desired colors and textures, and then select only premium materials from reputable manufacturers.

It’s crucial to take durability and style into account when selecting linoleum for your hallway so that it will withstand heavy traffic while still looking good with your interior design. This post will walk you through important considerations when choosing linoleum, like wear resistance and ease of maintenance, and provide helpful installation advice to ensure a polished appearance.

Average prices for craftsmen"s work

The owner of the property must have a precise understanding of the projected cost of these works before hiring professionals to install carpet in their spaces for a variety of uses.

Prices for all types of work on laying linoleum in the corridor and preparing the base are roughly the same and vary within the following limits (excluding prices for the building materials themselves), given the highly competitive nature of the service market under consideration:

Preparing the base

  • Partial dismantling of the screed – from 150 – 300 rubles. for 1 defect.
  • Complete dismantling of the old screed – from 200 – 400 rubles. per 1 m 2, depending on the thickness and strength of the structure.
  • Pouring a new unreinforced cement-sand or concrete screed with a thickness of up to 50 mm using the wet method – from 450 – 500 rubles. for 1 m 2 .
  • The same, with a power of up to 100 mm – from 600 – 700 rubles. for 1 m 2 .
  • The same with reinforcement and thickness from 50 to 100 mm – from 700 to 800 rubles. for 1 m 2 .
  • The same, with structural fiber reinforcement, using semi-dry laying technology, up to 50 – 70 mm – from 500 – 550 rubles. for 1 m 2 .
  • The same, more than 70 mm – from 650 – 750 rubles. for 1 m 2 .
  • Local repair of chips, cavities, cracks, traces of delamination of the screed using a non-shrink mixture – from 200 – 500 rubles. for 1 defect.
  • Self-leveling floor installation – from 250 – 450 rubles. for 1 m 2 .

Insulation

  1. Preparing the base plane for insulation – from 200 – 400 rubles. for 1 m 2 .
  2. Insulation with extruded polystyrene foam with a thickness of 30 to 50 mm – from 250 – 300 rubles. for 1 m 2 .
  3. Insulation with mineral wool slabs with a thickness of 50 to 100 mm – from 350 – 450 rubles. for 1 m 2 .
  4. The device of protective structure of insulating materials – from 300 – 550 rubles. for 1 m 2 .
  5. Insulation of the screed under warm floors – from 150 – 250 rubles. for 1 m 2 .

Laying and fixation of the coating

  1. Laying a heterogeneous linoleum on a pre -prepared base in rooms up to 50 m 2 – from 350 – 400 rubles. for 1 m 2 . The same, from 50 to 100 m 2 – from 300 – 350 rubles. for 1 m 2 .
  2. Over 100 m 2 – from 250 – 300 rubles. for 1 m 2 .
  3. The same, but laying heterogeneous linoleum to 50 m 2 – from 400 – 450 rubles. for 1 m 2 .
  4. The same, from 50 to 100 m 2 – from 350 – 400 rubles. for 1 m 2 .
  5. Over 100 m 2 – from 300 – 350 rubles. for 1 m 2 .

It should be remembered that the suggested costs listed above are for installing carpet.

When you meet with an engineer on site, you should send photos of the completed premises or project drawings to the customer service representative. The specialist will then calculate a detailed estimate and submit for approval the cost of each type of work and the total volume of installation operations. This is how to find out the exact cost of a set of works from a contracting organization that is officially registered on the market.

Selecting the ideal linoleum for your hallway entails more considerations than just color or design. Because corridors see a lot of foot traffic, durability is important. By choosing a thicker, more resilient linoleum, you can avoid having to replace it frequently. A corridor is subject to wear and dirt, so don’t forget to take into account how simple it is to clean and maintain.

Selecting the appropriate material is not as important as installing it correctly. Prior to applying the linoleum, make sure the surface is level, clean, and free of wrinkles. A long-lasting finish can be achieved by using an adhesive appropriate for the type of linoleum you have and letting it settle properly before heavy use.

You can design a corridor that is both aesthetically pleasing and resilient to regular use by paying close attention to these little details. For years to come, your linoleum will improve the look and feel of your space with the proper choice and meticulous installation.

Video on the topic

How to choose linoleum?#interior designer #flooring #interior designerbarnaul #barnaul22

Laying linoleum in a corridor of complex shape.

Laying linoleum in a one-room Khrushchev-era apartment in the kitchen with a corridor.

How to properly lay linoleum in an apartment relative to windows in one or more directions?

Laying linoleum in the corridor! How to correctly calculate and lay linoleum in the corridor.

What factor is most important for you when choosing materials for building a house??
Share to friends
Konstantin Zhukov

Gardener, landscape designer. I will help you create a beautiful and functional landscape design for your site.

Rate author
StroyArsenal62.com
Add a comment