Tips from the master: how to select a pattern and cut wallpaper in difficult places?

Selecting and cutting wallpaper can be difficult, particularly if you have to work around windows, in corners, or behind radiators. These areas frequently call for a little more expertise and perseverance, but with the correct advice, you can accomplish a polished finish that completely changes your space.

This post will offer professional guidance on choosing the ideal patterns for your room and how to confidently take on those difficult areas. Whether you’re an experienced do-it-yourselfer or this is your first time wallpapering, our advice will help you finish the project correctly.

We’ll walk you through every stage, from deciphering pattern repeats to perfecting the skill of swerving around obstacles. Bid farewell to annoying errors and hello to gorgeous, smooth wallpaper that complements the interior design of your house.

Any room can be transformed by carefully choosing and cutting wallpaper for difficult areas, transforming potential headaches into gorgeous design elements. Learn to wallpaper by selecting patterns that go well with your interior, positioning patterns to create a smooth finish, and becoming an expert at precisely cutting around windows, corners, and strange shapes. Even the most difficult areas can be handled with assurance and grace if you follow these professional advice, guaranteeing a faultless outcome each and every time.

Traditional cutting method

For cutting materials for wall cladding, a knife with segmented special blades can be used. You can effortlessly cut material in various directions with this tool.

A specific level is needed to guarantee cutting with the highest level of precision. The latter is made with alcohol. It functions as a ruler. But applying the standard rule is simpler.

A medium-length, sharp scissor blade can be used to trim the edges of material that is not being used.

1. To start cutting the material, the surface is first prepared. You need to stick a special film of a given thickness (from 80 microns) on it. This will be the ideal surface for coating the material with adhesive elements. Initially, the number of stripes is calculated, which is important to maintain. If the width of the material is 500 mm, then before cutting the perimeter of the room is measured (read how to calculate the required wallpaper along the perimeter and area of ​​the room here). Let"s say it"s 10m.
2. Now this value is divided by the width of the material: 10:0.5=20. This means that for work you will need to use twenty solid strips of material. Then it is important to pay attention to the length of the package. Its indicator is divided by the height of the ceilings (in this case, it is two and a half meters). Rapport is taken into account for combining canvases. This way we can calculate the number of whole stripes in the convolution. The required number of strips is then divided by the number of whole sheets in the roll. The result will be an indicator equal to the number of rolls. The classic roll length is ten meters. This way you can get up to four stripes per package. To calculate the number of rolls, the number of solid layers needed for one room is divided by the number of sheets per roll. In the example under consideration it looks like this: 20:4=5.
3. From this indicator you need to subtract the area that will not be used. This is the opening for the window and door. According to the general rules, they take up half a roll. Accordingly, you will need to buy four bundles of material. You can buy a few extra rolls as a reserve.
4. After the calculations, you need to find out the height of the upper internal covering of the room. The height is measured from the floor surface to the top point. It is important to take such measurements in all corners of the room. Suppose there is a traditional number of corners in a room that have different heights. For example, the minimum indicator is 220, and the maximum is 260. Here cutting is carried out according to the maximum indicator (260).

The material needs to be cut in accordance with the label:

• no ornament;
• with a selected pattern that does not move;
• with a selected pattern that moves;
• cutting without additional ornament or design.

The simplest and most conventional way of cutting is this one. The material can be cut 10 mm less, or 259 cm, at the highest point of the room’s upper internal covering (260 cm in our example). This can be explained by the fact that the floor is enhanced with unique wooden decorative strips (plinths), which shorten the top by 10 mm and the bottom by 50 mm.

Rolls without extra decoration are just rolled out to the designated side and secured with glue to keep them from moving.

Selection of drawing

With ornament without offset

Everything is a little harder in this instance. Consider the room’s upper internal covering, which is 260 cm tall. The ornament step is then calculated, for instance, to be 55. Every line has to begin the same way. There won’t be enough stripes for a single sheet; the three pitches will be 4 x 55 = 165 cm. Thus, we make five steps (5 × 55 = 275 cm). For this reason, cut strips 275 cm long before beginning repairs.

Find out more about altering wallpaper to fit a pattern.

With offset ornament

Let’s examine how to choose an offset pattern and properly cut the material. This is a fairly involved procedure. After one, the stripes will again appear. However, the ornamentation or striped pattern is chosen first. Determine how many strips will be required. For instance, wallpaper with certain stripes is adhered first, followed by others, and so forth.

Number the cut strips so that you don’t get lost in the series of strips with a pattern offset.

Twenty sheets are presumably used for the room, which has ten stripes of one pattern and ten stripes of another (how can two different types of wallpaper be hung together?). Next, the pattern of stripes or embellishment is decided. For instance, 640 and 320 mm, in that order.

You must determine the smallest multiple that is greater than 2600 mm and equal to 320 mm (the ceiling height from the previous example). The outcome will be 9×32=288 cm, which is higher than the recommended ceiling height of 260 cm, indicating that this cut is perfect.

See another publication to learn more about customizing wallpaper based on a pattern.

How to trim correctly?

It is preferable to complete all of the steps while applying wallpaper adhesive to the walls in order to correctly trim fabrics at the joints and evenly trim their excess in the corners. As a result, it’s critical to focus on each task phase.

Applying glue

It’s crucial to apply adhesive to the wall joint areas completely (how to weld, use and store wallpaper adhesive?). There’s a chance that the coating will peel off the corners. Thus, a roller or brush is used to apply the adhesive emulsion.

Since there are four corners in every room, these actions ought to be performed four times minimum. The canvas is initially adhered in the least noticeable spot. Errors committed during operation won’t even be apparent.

How to cut under the baseboard?

After pasting the walls, a knife with a sharp blade is used to accurately and uniformly cut the canvas beneath the plinth (how to glue plinth to wallpaper?).

In the corners

On a level wall with optimal joint locations, a layer of material should be adhered to with an 80–100 mm overlap. The next piece of fabric is glued several centimeters away from the area of bending. There should be a 60 mm overlap.

The central portion of the overlap area is cut. Cutting through two layers at once requires an extremely even cut along the vertical line.

Further details regarding the application of wallpaper adhesive in room corners are covered in a separate section.

Work on external joint areas

Inside, exterior corners are also frequently encountered. Usually, they are window and door openings, as well as slopes. There won’t be any issues if you need to cover smooth slopes with material.

1. Glue the strip on one side so that the edge of the layer touches the adjacent wall by approximately 40 mm.
2. Next, the sheet of material is leveled and smoothed. If unevenness and bubbles have formed, then a minimum of cuts are made on the layer (read more about why bubbles appear when gluing and how to remove them).

We sincerely hope you find this information useful and that you make use of it. The key to successfully adhering wallpaper is to strictly follow the instructions, perform accurate calculations, and consider your options before cropping another image. You can view a number of freely accessible videos on the Internet to get a visual representation of what you have read.

Careful preparation and useful advice from seasoned pros are needed to cut wallpaper and choose a pattern in challenging areas. Start by selecting a pattern that goes well with the style of your room and the existing furnishings. To prevent ugly seams, don’t forget to take pattern repeats into consideration and match them accurately.

Exactness is essential when cutting wallpaper around obstructions like windows, doors, and corners. To make precise cuts, use a straight edge and a sharp utility knife. To guarantee accuracy, measure twice and cut once. Make templates out of cardboard or paper for areas that are complex so that your cuts are guided.

Don’t hurry things along. Take your time cutting precisely and aligning patterns. Make sure your wallpaper hangs straight, especially in awkward places like corners, by using a level. By using these professional tips, you can create a beautifully decorated room with a professional finish.

Video on the topic

How to match wallpaper to a pattern. We count the number of rolls correctly!

How to easily and quickly hang wallpaper with pictures. #room wallpaper #wallpaper for walls #wallpaper #paintable wallpaper

⭐ How to evenly cut wallpaper with selection | How to properly cut wallpaper to fit the pattern | Me Repair

how to cut wallpaper with a pattern correctly.