Construction of a fence from corrugated sheets on a strip foundation

One useful way to improve the appearance and security of your property is to build a fence. Corrugated sheets are a common material option for fences. Corrugated sheets, which are well-known for their strength and contemporary style, provide an affordable option that is resistant to a range of weather circumstances.

However, laying a solid foundation is essential to guaranteeing the longevity and stability of your corrugated sheet fence. For this use, a strip foundation is a great option. This kind of foundation keeps the fence from sagging or tilting over time by offering a sturdy base that equally distributes the weight.

We’ll walk you through the process of building a corrugated sheet fence on a strip foundation in this guide. Every step will be covered in detail, from setting up the site to putting in the corrugated sheets. Whether you’re a novice builder or an experienced do-it-yourselfer, these clear instructions will help you create a fence that looks great and increases the value of your home.

When to choose a tape?

In the following scenarios, the structure must be installed on a monolithic strip base:

• Heavy materials are used to make the cladding. Corrugated sheets are metal sheets with a continuous structure, the weight of which is quite large. To increase the service life of the fence, it is advisable to choose tape. The same applies to the installation of structures with forged elements.
• The pillars are planned to be made of brick. They create excessive pressure on the ground and need a strong foundation that can withstand a large load-bearing load.
• The site is located on a slope from the road, and in the spring rainwater flows into the territory.
• There are domestic animals living on the site, which regularly try to escape by digging.

A monolithic foundation also strengthens and gives the fence a more representative appearance.

Other options:

• Columnar supports.
• Rubble foundation.
• Ribbon-column design.

Collection tape is an additional option. Because there is no need to mix the concrete and wait for it to harden, it can be installed more quickly. It is therefore preferable to select her if there are approaching deadlines.

It is important to keep in mind that the price of this kind of foundation is typically higher, meaning that it will not be feasible to complete the task without specialized equipment because the blocks themselves are relatively expensive. For fences, monolithic tape is therefore frequently used.

Advantages and disadvantages

The following are some benefits of installing such a base:

• Large bearing load, making it possible to install a fence of almost any height.
• Resistance of the structure to random and directed mechanical impacts, contact with moisture, temperature changes.
• Possibility of construction on a site with a slight angle of inclination.
• Ensuring a solid appearance of the fence.
• Long service life: with proper arrangement, the base-tape retains its qualities for 50-70 years or more.

A number of drawbacks of the strip structure must also be considered before design and construction move forward.

Principal drawbacks:

• Under such a foundation, you will need to dig a trench around the entire perimeter: this not only increases the cost of construction, but also makes it longer and more labor-intensive.
• If you build on heaving or unstable soil, you may encounter deformation of the monolith due to movement.
• After pouring, you need to wait several weeks so that you can install the pillars: if the concrete does not have time to dry, premature installation of the frame will lead to cracking.

Types and features of corrugated sheet fencing

These structures differ in height, section length, base depth, design, and other aspects; the most common way to categorize the products is by the kind of supports they employ.

With brick pillars

These fences have a longer lifespan, are more resilient to outside influences, and seem more substantial. They are also more functional. The use of brick increases the structure’s weight significantly, so a shallow foundation cannot be placed beneath it.

These fences are prone to uneven shrinkage, so in order to prevent it, they typically have an embedded section that is secured with crossbars all the way around.

The typical pillar height is between 200 and 300 cm, and the width, unless the reinforced structure is based on a personal project, does not exceed 1.5 to 2 bricks.

With metal posts

Because it is more reasonably priced and requires less time and effort to install metal poles, this type of fencing is more popular.

The most common shapes for supports are square or round sections starting at 50 mm; the wall thickness needs to be at least 2 mm.

Galvanized surfaces are used to keep moisture away from them. In order to give the posts an appealing appearance, they are usually painted in addition. The canvas is taken into consideration when calculating height; elements shouldn’t rise above it because it is not visually appealing.

Typically, the metal posts are positioned 10–20 cm below the corrugated sheet’s upper edge.

Tools and materials

The following supplies must be bought in order to begin manufacturing:

• Corrugated sheet. When choosing, you should pay attention to the markings: for fencing, the optimal material is with index 8, 13, 18 or 19. The quantity is calculated taking into account the length of the perimeter and the installation method (vertical or horizontal).
• Roofing screws. They must be equipped with rubber or vinyl gaskets: these elements protect the fasteners from spontaneous unwinding.
• Simple self-tapping screws for formwork.
• Metal pipes. Their height must be at least 2.5 meters.
• Brick, if installation with brick pillars is planned. It is best to choose a red wall material, you can also purchase a yellow facing material, but this increases the cost of the structure.
• Cement, medium crushed stone and sand for preparing the mixture. For production, you can use either a concrete mixer or a construction bath; the composition should contain 3 parts sand and 1 part crushed stone per 1 part of cement powder.
• Formwork material (plywood, boards, etc.).
• Fittings with a diameter of 1.5 cm.
• Knitting wire.
• Electrodes, if installation for welding is planned.
• Protective caps.

Regarding the tool, the subsequent devices will be necessary:

• Shovel.
• Plumb.
• Building level.
• Concrete mixer or container for mixing cement.
• Screwdriver.
• Welding technology.
• Drill with mixer.

You will benefit from a strong, long-lasting solution that combines the dependability of a solid strip foundation with the strength of corrugated metal when building a fence out of sheets of corrugated metal on a strip foundation. This method is a sensible option for many homeowners because it guarantees a sturdy fence and offers an easy-to-follow building process. You can improve the privacy and security of your property by building a safe and aesthetically pleasing fence by knowing the important procedures and factors to take into account.

How to make it yourself?

It is possible to build a fence independently using corrugated sheet cladding and a strip foundation; the key is to adhere strictly to the technology.

Preparation

At this point, markers are created by putting pegs in the corners, at the locations of gates and wickets, and at the supports’ locations.

The foundation position is marked by pulling the cord between the corner marks. Generally, there should be a 2-meter gap between the supports, but this can change based on the weight and size of the building.

Step -by -step instructions and photos of an approximate installation scheme

Following preparation, the steps are as follows:

• Excavation. The territory is cleared, after which they dig a trench, the size of which is determined taking into account the width of the future tape and the thickness of the formwork. The degree of deepening varies from 25 to 35 cm below the freezing point depending on the characteristics of the soil. At the points of installation of the supports at the bottom of the trench made, deep holes are formed, the width of which is larger than the diameter of the pillar.
• Arranging pillow of sand and gravel. Before that, the soil is compacted with a vibro -plate, then the sand is covered with a layer of 5 cm, moistened and trim, then laid crushed stone, tightened again and put a layer of waterproofing.
• Arrangement of a reinforced frame. In the case of installing a fence with metal posts, the frame is only needed for the foundation itself, when creating a brick structure, it will be necessary to equip it for the posts as well. The location of the longitudinal rods should be at a distance of 5 cm from the formwork, transverse rods are placed in increments of 20 cm. The structure is fastened with welding or binding wire; the second option is more preferable.
• Assembly and installation of formwork. Boards, slate, chipboard, plywood can be used for this. Bars are installed at the edges of the trench, shields are placed at the walls, connecting with self-tapping screws.
• Pouring concrete for foundation. In parallel with this, metal poles are installed, if provided for by the design; the supports are leveled and fixed for subsequent final fastening. A layer of mixture 15 cm thick is placed in the trench, air is removed using reinforcement, and pouring continues in layers. If the fence is made with brick pillars, concrete mixture is poured into their frame. Hardening of concrete lasts from 3-5 days to 1-2 weeks depending on weather and climatic conditions. Concrete gains full strength in a month.
• Removing formwork, installation of facing bricks for pillars, if the project provides for this.
• Installation of guides (usually there are 2 of them) from a profile pipe. Fastening is carried out by welding or corners.
• Installation of corrugated sheets. It is fixed with roofing screws; upon completion of work, the surface of the sheets can be painted.
• Installation protective caps for poles.

The image displays a typical plan for building a fence on a strip foundation:

Cost of work

The average cost of ordering a turnkey fence varies from 1500 rubles when installed with metal poles to 2500 rubles when installed with stone or brick supports. Material costs are roughly 800-1000 rubles per linear meter.

The size of the fence, extra components, the quantity of entrances and entries, and other elements affect the final cost.

Possible errors and tips for construction

More frequently The following errors are made when constructing these structures yourself:

• Wrong choice of trench depth.
• Installation next to a ditch.
• Incorrect load bearing determination.
• No expansion of the base for supports used for mounting gates.
• Premature dismantling of formwork.
• Excessive number of pillars.

Useful video

In the video, there are helpful hints for installing a fence:

Step	Description
1. Plan and Design	Decide on the fence dimensions and layout. Measure the area where the fence will be installed and create a design plan.
2. Prepare the Site	Clear the area of debris and mark the fence line. Ensure the ground is level where the foundation will be placed.
3. Dig Trenches	Dig trenches for the strip foundation. The depth and width will depend on the local soil conditions and fence height.
4. Pour Concrete	Pour concrete into the trenches to create the strip foundation. Allow the concrete to cure completely before proceeding.
5. Install Posts	Set fence posts into the foundation at regular intervals. Ensure they are level and secure them with concrete if necessary.
6. Attach Corrugated Sheets	Attach corrugated sheets to the posts using screws or bolts. Ensure the sheets are aligned and secure.
7. Final Touches	Check for any loose screws or gaps. Make any necessary adjustments and paint or treat the fence for added durability.

For many homeowners, building a fence out of corrugated sheets on a strip foundation is a sensible option. Because of its simplicity of installation and durability, it’s a well-liked choice for property security. The fence’s weight is supported by the strip foundation, which also guarantees stability over time.

The steps listed will help you build a fence that is strong and durable. Make sure your foundation is level and ready to go first. Your fence will have the strength it needs to resist the weather if the corrugated sheets are installed correctly and fastened to the foundation.

All things considered, this kind of fencing is not only practical but also reasonably priced. Your fence can function well for many years with little upkeep. An effective and dependable solution for increasing the security and aesthetics of your property is a corrugated sheet fence installed on a strip foundation.

Video on the topic

#shorts Fence made of corrugated sheets on a strip foundation: Description

Beautiful fence without foundation.

Do-it-yourself corrugated fence. Part 3. Foundation for a fence

Fence made of corrugated sheets on a strip foundation

Price – Strip foundation – do-it-yourself corrugated fence

I poured a strip foundation for the fence and it turned out …