Down with the remnants of the past, or how to glue wallpaper not from the window, but from the door

Are you sick and weary of battling dated wallpaper that looks like it’s been there forever? This guide is for you if you’re ready to revamp your area without having to deal with dated décor. We’ll guide you through the process of effectively removing outdated wallpaper and getting your walls ready for a brand-new appearance.

Although removing old wallpaper can seem overwhelming, it can be done manageably with the correct method. You’ll be able to bid farewell to relics from the past and welcome to a blank canvas for your interior design goals if you adhere to our advice and techniques.

Whether you’re working on a single room or the entire house, knowing how to remove old wallpaper successfully will help your renovation project get off to a good start. Now let’s get started with the doable tasks that will prepare your walls to display the contemporary, eye-catching paint job or wallpaper you’ve always wanted.

Pasting methods

Verify that the surface is free of any prior coating before beginning the glue process. Previous coating remnants need to be meticulously cleaned so as not to harm the wall. If not, you’ll need to gently rub putty on the wall to level it.

It’s simple to remove the simplest paper sheets that were previously glued to the wall:

  1. You need to moisten the surface generously with water and wait about 15-20 minutes.
  2. Then, using smooth movements, starting from the ceiling, remove the previous coating.
  3. If the walls were previously covered with waterproof materials, you will have to work with a spatula.

Before, we would begin the wallpapering process from the window. This is because the wallpaper was adhered to overlap one another. Every task started from the area in the room with the most light to conceal any imperfections.

However, gluing wallpaper from the door is also a very common technique (where and how to start gluing wallpaper?). It works well for adding surface-applied vertical stripes. All doors have the highest vertical height and precisely proportionate slopes. Sticking the strips evenly is made easier when you concentrate on the doorway.

Since there are no longer any issues connecting the canvases, it is preferable to go with the easiest approach and begin pasting the walls from the entrance (how to join wallpaper correctly?).

Around the doorway

If the wallpaper pattern is not plain, it is crucial that it matches exactly. When there is no pattern on the canvas, the task becomes much easier and goes more quickly.

  1. First, you need to cut strips of the required length. Then you need to attach them to the already pasted canvas without a gap.
  2. Make diagonal cuts at the places where the door frame is attached. Remove the excess part of the wallpaper, otherwise it will interfere with pasting. Do not leave too much stock at the top or bottom – it will be very difficult to hide them behind the door frame.
  3. Press the material firmly to the wall. Start smoothing with a roller, starting strictly from the center, with smooth movements.
  4. If there is still excess, then get rid of it with a stationery knife. Keep in mind that the blade should be as sharp as possible, since wet coatings are not so easy to cut.
  5. Remove excess glue with a sponge or with a rag. If the wallpaper is not paper, then you can slightly moisten it with water. To completely hide the excess under the casing and not leave any gaps, it is enough to make an allowance of 2-2.5 cm.
  6. To push the wallpaper under the casing, use a special wide metal spatula.

On the slopes

Once you’ve completed pasting the door slopes, move quickly to paste the following canvas. In order for the canvas to cover the door opening, the wallpaper must be brought to the slope. If the width of the roll is greater than the slope, it will be much more convenient. If you can’t do this, then you need to stick a narrow strip of wallpaper on the open area. For the strip to be glued end to end, precise measurements must be made.

It is important to keep in mind that the coating should just barely touch the door frame.

The canvas must be cut vertically so that the excess is chopped off and the canvas extends slightly beyond the corner line, about 2-3 cm. We follow the same procedure on the other side of the door slope.

The space in the center of the doorway still needs to be pasted over. It must be precisely measured, and a piece from the roll of the necessary size must be cut. It’s important to keep in mind that the wallpaper should reach the door frame and the inside of the slope.

Here is a demonstration of applying wallpaper glue on a slope:

What to do where there are a lot of door structures?

The complexity of pasting will increase significantly if the room has multiple doors. You must begin adhering the canvas from the least noticeable spot or from multiple landmarks at once in order to achieve a satisfactory outcome.

  • If the measurements are taken correctly, then you can start with two points that are least noticeable. This is a place behind a closet or in the corner of a room. Even if the drawing doesn’t come together in the end, no one will see it.
  • You can start gluing the canvas from the door that is visible to everyone, and finish at the one that is not so accessible for viewing.
  • If the width of the roll corresponds to the distance from door to door, which is rare, then it makes no difference where to start pasting.
Step 1: Prepare the Wall Clean the wall surface thoroughly, removing any old wallpaper, dirt, or debris.
Step 2: Mea Let Dry and Enjoy Allow the wallpaper to dry completely according to the manufacturer"s instructions before enjoying your newly decorated space.

This is a brief summary to wrap up your wallpapering article:

When it comes to wallpapering, beginning at the door instead of the window can have a big impact on how well your project turns out. Starting at the door guarantees that your wallpaper will perfectly complement the room’s main feature, giving the space a polished appearance.

Remember that getting the job done right requires careful planning. Before you start, make sure your walls are dry, clean, and smooth. Take your time when measuring and cutting your wallpaper to ensure that any patterns line up perfectly at seams and corners.

Finally, if you have any questions at any point during the process, don’t be afraid to ask for help or refer to tutorials. Wallpapering is a fun and easy do-it-yourself project that can completely change your room. It’s best to start at the door to ensure a professional finish.

This conclusion wraps up your article on a practical note, emphasizing the benefits and practical tips for starting wallpapering from the door.

It can be a laborious task to remove old wallpaper in today’s home renovations. Instead of starting at the window, though, we should start at the door to optimize the procedure and produce more effective outcomes. This post discusses useful advice and detailed instructions for successfully removing outdated wallpaper and priming your walls for a brand-new appearance. Homeowners can save time and effort while accomplishing professional-quality wallpapering projects by using this "door-first" approach.

Video on the topic

Drafts and wallpaper

You can glue wallpaper without removing the socket or switch

Gluing overlapping wallpaper! Instructions from Astan!

What factor is most important for you when choosing materials for building a house??
Share to friends
Milan Yashina

Design engineer, specialist in development of design documentation. I will help you correctly design your home or other building.

Rate author
StroyArsenal62.com
Add a comment