What is the approximate cost of erecting a strip foundation for a fence and how to calculate it?

A fence’s strip foundation must be built in order for the structure to be stable and long-lasting. This kind of foundation keeps your fence safe and upright by offering a sturdy base that can tolerate a variety of environmental conditions.

A thorough understanding of the expenses associated with this process is necessary for efficient budgeting. The cost can change depending on a number of variables, such as the materials used, the kind of soil, and the height and size of your fence.

You must account for labor expenses if you intend to hire professionals, as well as the cost of supplies like concrete, rebar, and gravel, when estimating the approximate cost. It’s also crucial to account for any preparatory work that needs to be done, like site leveling and excavation.

We’ll walk you through the process of estimating the cost of a strip foundation for your fence in this post so you can plan ahead and avoid any surprises. You’ll have a better idea of what to anticipate by the end and how to adjust your budget accordingly.

What does the price depend on??

When installing a fence, a properly calculated strip foundation is essential to the overall structure’s dependability and longevity. The primary factors influencing the price are:

Depth

What influences the foundation depth is:

• soil composition (sandy, clay soils),
• climate zone (southern, northern regions).

In the winter, builders recommend digging a foundation below freezing point. If you heed their advice, residents of Moscow and the Moscow region should dig 1.5 meters below the freezing point, and in the northern regions, even deeper.

Experts assure that a fence’s strip foundation should not be drilled any deeper than 40 cm and that the structure will endure for many years. It’s possible that the foundation is deeper, but this will cost more money and materials.

Depth optimization can be obtained by:

• good sand cushion,
• reinforcement cage,
• concrete selection (M200, M300).

Width

The area of contact with the ground is determined by the width of the foundation; the larger it is, the lower the specific loads that arise.

You can determine the necessary width by computing the specific load and comparing it to the soil’s density. In this instance, a factor of 1.3 should be added to the found parameter to account for unanticipated weather disasters.

Experts advise:

• if the fence is made of corrugated board, then the parameter should be no more than 250 mm;
• a forged fence or from a profile pipe when laying a brick-thick plinth – at least 380 mm;
• for heavy brick buildings with a 1.5 k plinth. – not less than 500 mm.

Length

Everything about this is clear: the longer the fence, the more expensive the installation and the more materials needed.

What influences the amount of cash costs?

In order to prevent the fence from collapsing too soon, a number of factors affect the overall cost of construction work when pouring a strip foundation.

Principal variables:

1. Soil type. The composition of the soil affects its ability to withstand specific loads.
2. Terrain (freezing depth, abundance of rainfall, snowfall).
3. Cost of building materials (sand, crushed stone, boards for formwork, reinforcement and the most expensive material – concrete mixture).
4. Dimensions of the building (width, depth, length, fenced area).
5. Hiring craftsmen. If all construction work is done on your own, then this item can be deleted from the expense item.

Since construction is frequently unpredictable, the final cost needs to be multiplied by 1.3–1.5. Saving money on building supplies won’t be worth it because the fence will break down sooner than expected.

Average prices for materials for 5 megacities

Table 1 lists the national cost of construction supplies for strip foundations:

How much does a linear meter cost??

When considering materials and labor across the nation, the average cost of building a fence foundation is between 2500 and 2800 rubles per linear meter.

Included in the work are:

• preparing the surface for the foundation,
• digging a trench of the required size,
• carrying out calculations,
• erection of formwork,
• pouring the foundation,
• removing formwork after concrete has dried.

Table 2 shows the cost of strip foundations nationwide while accounting for labor costs and building supplies:

Comparison of costs for independent construction and with the involvement of crews

The costs listed in Table 2 can be roughly divided by 1.7–2 times to determine the amount required for building supplies if the fence is constructed on your own without the assistance of a construction crew. In this instance, the entire area of the foundation pouring must be determined. After that, sand, crushed stone, and cement cubes must be ordered.

Additionally, you can figure out how much it will cost to build a sturdy fence if you know how big the strip foundation is.

Online calculators are available on many construction sites and can be used for calculations.

This section contains all pertinent and significant information regarding building a fence strip foundation.

Building a strip foundation for a fence requires taking a number of factors into account when estimating the cost. Together with labor costs, the primary components are materials like formwork, reinforcement bars, and concrete. The fence’s dimensions and length also have a significant impact on the final cost.

Measure the fence’s overall length in order to get an estimated cost. Next, ascertain the foundation trench’s width and depth. This will assist you in determining the necessary volume of concrete. Don’t forget to factor in the price of the other materials and reinforcement bars that are required for the foundation.

The labor expenses can differ substantially depending on the project’s complexity and location. Get estimates from several contractors if you intend to hire experts to make sure you’re getting a fair price. If you choose to do it yourself, be sure to account for the time and effort involved.

In conclusion, the cost of building a strip foundation for a fence is determined by the project’s size, labor costs, and material prices. With meticulous measurement and computation of every component, you can create a budget that works for your fencing project. If at any point during the process you have questions, you should always think about seeking professional counsel or assistance.

The length and height of the fence, the kind of soil, the materials needed, and labor costs are some of the variables that affect the cost of constructing a strip foundation for a fence. You must measure the perimeter of the fence, ascertain the width and depth of the foundation trench, and select the necessary materials, such as reinforcement and concrete, in order to approximate the cost. You can get an estimate of the overall cost by multiplying the material quantities by their unit prices and then adding labor costs. This post will walk you through the process and give you a precise way to compute the cost efficiently.

Video on the topic

🔥how to replace the foundation for a fence!?

Fence foundation. Pile-grillage and strip foundation for the fence. Panel formwork. Minsk

HOW MUCH DOES A LINEAR METER OF CORPORATE FENCE COST IN 2025?

Fence on a shallow belt with bored piles. Scheme and calculation of estimates.

Foundation for a fence in 1 day!

🔥tape for fence 700₽ mp

What is a strip foundation for a fence and in what cases is it necessary?? Types and cost of foundation