Sharpening electric saw chains with your own hands – an overview of methods

Maintaining a sharp electric saw chain is necessary for both safe and effective cutting. A dull chain will slow you down, increase the effort required of your saw, and raise the possibility of an accident. Thankfully, you can sharpen your saw yourself without having to hire a professional. You are able to sharpen your electric saw chain on your own with the appropriate equipment and methods.

We’ll look at a few different ways to sharpen your saw chain at home in this article. We’ll go over how to restore your chain to its best working condition, whether you’d rather use a file, a sharpening kit, or a specialty tool. Over time, regular chain sharpening can save you money, time, and effort.

In addition, we’ll offer advice on which approach is most appropriate for you based on your level of experience and the available resources. You will have the skills and assurance necessary to maintain your electric saw chain by the time you finish reading this guide, guaranteeing clean, accurate cuts each and every time you operate your tool.

What are the dangers of working with a blunt instrument?

The purpose of the chain on an electric or gas saw is to cut both soft and hard wood, as well as plastic items. Regular use of the tool can cause the chain mechanism to become dull, which can have unfavorable effects. You run the risk of breaking any one of the tool’s individual components if the chain mechanism is worn out. Fuel usage rises when using a dull chainsaw for sawing.

Extra Details! The stupid chainsaw process operates slowly and performs noticeably worse when in use.

The chain mechanism needs to be checked and sharpened on a regular basis to keep the saw operating for a long time. Depending on how frequently the tool is used, the check should be done in between jobs.

When should you start sharpening your chain?

If you see any of the following indicators, it’s time to sharpen the chain:

• During operation, more effort is required, and the chain constantly gets stuck inside the wood.
• The saw often jams, the chain regularly sags and stretches.
• Wood sawdust after working with a blunt saw is heterogeneous, more like dust.
• When cutting material, smoke appears, the saw vibrates and breaks out of your hands.

The tool as a whole may malfunction if you overlook the previously mentioned factors in addition to the chain. In this scenario, you will need to buy a brand-new, pricey saw. A dumb chain can also result in a serious injury.

Following the guidelines for sharpening a power saw chain correctly should be followed, and then you should assess the level of sharpening. Every cutting tooth needs to have the same dimensions. When sharpening, you must use roughly the same amount of pressure and movement force to get the desired outcome.

Take note! The teeth on gasoline and electric saws are identical. The length and quantity of the tires account for the variations. These indicators are dependent on engine power for chainsaws. This feature enables you to use one of the chosen methods to sharpen both kinds of saws equally.

Methods for sharpening a chainsaw chain

Knowing the angle at which the chainsaw chain needs to be sharpened is crucial when using any kind of sharpening technique. There are several efficient ways to process chainsaws at home in a high-quality manner:

• using a file;
• using a grinder;
• electric machine;
• manual machine.

All of the techniques are highly efficient, aid in precisely honing the chain’s teeth, and significantly prolong the lifespan of the electro- or chainsaw.

The easiest and most accessible method—albeit the most labor-intensive—is to sharpen with a file. An electrical network is not necessary for this; the work can be done in any setting. It is advised to use a round file with a fine to medium cut to sharpen teeth.

Not everyone is aware of the proper angle for machine-sharpening chainsaw chains. The teeth-sharpening tool needs to be rotated 180–200 degrees for optimal results. Either manually operated equipment or an electric machine can be used to easily achieve this angle.

There are certain challenges with the widely used technique of using a grinder to sharpen a saw’s cutting edge. During the procedure, the tool disk might unintentionally burst and hurt other people.

Basic rules for sharpening a chain

You need to adhere to a few basic guidelines in order to correctly sharpen the chain of an electric or gasoline saw at home or at work:

• When dragging a file, the number of movements should be the same for all teeth of the cutting part.
• The sharpening angle can only be maintained using a special device or machine.
• When grinding down more than 90 percent of the tooth length, the cutting component should be replaced with a new one.
• The file is used in case of slight dulling of the chain teeth, only for straightening.

Crucial! Oversharpening the chain’s cutting edges increases the risk of the element breaking while it’s in use. A saw malfunction during cutting could cause the saw to jerk violently, which could send someone falling onto the operating unit.

Although it may seem difficult, learning how to sharpen electric saw chains on your own is a skill that has many advantages. You can prolong the life of your chains and save money by doing it yourself. Furthermore, working with a sharp chain is safer and easier.

Saw chains can be sharpened in a variety of ways, from with basic files to with specialized electric sharpeners. Every approach has advantages and disadvantages, but all can be successful if used properly. It’s important to pay attention to details and follow the correct procedures.

Practice makes perfect whether you use a machine or a hand sharpener. You’ll gain confidence and efficiency with time and experience. To keep your electric saw operating at its best, keep in mind that routine maintenance is essential.

By taking the time to understand and put these sharpening techniques into practice, you can ensure that your projects go smoothly in addition to enhancing the performance of your saw. So gather your supplies and treat your saw chains to the maintenance they require. Cheers to your sharpening!

It’s not as hard as you might think to sharpen electric saw chains at home, and it can save you money and time. This post examines several do-it-yourself techniques for maintaining the sharpness of your chainsaw, such as filing, using a guide, or using a specific sharpening tool. Your cutting tasks will go more quickly and smoothly if you follow these easy steps to keep your saw safe and effective.

Video on the topic

Chain sharpening lesson from a real sawyer! How to sharpen correctly, improvements and tricks.

HOW TO SHARPEN A CHAINSAW CHAIN IN A NEW WAY

Do-it-yourself chainsaw sharpening